GMPP Fast Burn Flow Potential
Moderator: Team
-
- New Member
- Posts: 27
- Joined: Thu Apr 12, 2018 7:10 am
- Location:
GMPP Fast Burn Flow Potential
Has anyone ever competitively ported a 23 Degree GMPP Fast Burn cylinder head? If so what sort of flow numbers are attainable and what minimum cross sectional area can be achieved at the pushrod pinch?
-
- New Member
- Posts: 21
- Joined: Sun Oct 29, 2023 9:49 pm
- Location: Toronto, ON
Re: GMPP Fast Burn Flow Potential
I have the same heads in stock form, I know it doesn't necessarily answer your question, but it's quite interesting
[url}https://youtu.be/llKmTFnA7os?si=CewPF0xBU-JnD52C[/url]
[url}https://youtu.be/llKmTFnA7os?si=CewPF0xBU-JnD52C[/url]
Matt