I love this grinder. Tilting table lets you cut any cap regardless of the squareness of the cheeks. Built for main caps but it will do rods too. Great for those rods that are notoriously not square to the cheek, like SBF and Mopar. The best part is that you can visually scratch test a cap (unlike the Sunnen) and adjust the table with the 2 wing bolts, or install the lock pin for 90 degree cuts. 110 V, feed dial is in .001" increments. I am only selling because I'm retiring. Needs to truck ship or pick it up, I will crate for free, you arrange shipping. Danville, VA.
RMC 70 cap grinder
Moderator: Team
-
- Guru
- Posts: 1564
- Joined: Thu Sep 16, 2010 10:01 am
- Location: Virginia
- Contact:
RMC 70 cap grinder
You do not have the required permissions to view the files attached to this post.
"do it right or do it right away"
http://www.motionmachineinc.com/
https://www.youtube.com/watch?v=ZgIZbveknDs
http://www.motionmachineinc.com/
https://www.youtube.com/watch?v=ZgIZbveknDs
-
- Pro
- Posts: 234
- Joined: Fri Sep 26, 2008 12:00 am
- Location: Northeastern PA
-
- Guru
- Posts: 1564
- Joined: Thu Sep 16, 2010 10:01 am
- Location: Virginia
- Contact:
Re: RMC 70 cap grinder
Forgot that part. $2,000
"do it right or do it right away"
http://www.motionmachineinc.com/
https://www.youtube.com/watch?v=ZgIZbveknDs
http://www.motionmachineinc.com/
https://www.youtube.com/watch?v=ZgIZbveknDs