Here's a video I shot of my buddy running his recently completed '84 Trans Am build at ESTA. I remember when he first got this car back in high school, when it was completely stock with a 305. It's gone through many different combos over the years.
This is the first clean 660’ pass NA with the power pulled WAYYY back to make license passes.
1.33/5.25 @ 137 mph lifting to 8.53 @ 126 mph
This little 632 could possibly go 4.90s on the motor with the right combination at 2600 lbs.
https://youtu.be/Na6DAh0PPoU
The Knight Rider Trans Am at ESTA
Moderator: Team
-
- HotPass
- Posts: 604
- Joined: Tue Nov 30, 2021 8:47 am
- Location: West Milford, NJ
- Contact:
The Knight Rider Trans Am at ESTA
'73 Camaro Z/28 NETO/N
434 SBC 11:1, 1.294, 6.178 @ 108.87, 9.81 @ 134.93 (3060#, Naturally Aspirated, Sunoco Ultra 94)
Chopper Air Port 917-589-1278
434 SBC 11:1, 1.294, 6.178 @ 108.87, 9.81 @ 134.93 (3060#, Naturally Aspirated, Sunoco Ultra 94)
Chopper Air Port 917-589-1278
-
- HotPass
- Posts: 604
- Joined: Tue Nov 30, 2021 8:47 am
- Location: West Milford, NJ
- Contact:
Re: The Knight Rider Trans Am at ESTA
You do not have the required permissions to view the files attached to this post.
'73 Camaro Z/28 NETO/N
434 SBC 11:1, 1.294, 6.178 @ 108.87, 9.81 @ 134.93 (3060#, Naturally Aspirated, Sunoco Ultra 94)
Chopper Air Port 917-589-1278
434 SBC 11:1, 1.294, 6.178 @ 108.87, 9.81 @ 134.93 (3060#, Naturally Aspirated, Sunoco Ultra 94)
Chopper Air Port 917-589-1278
-
- HotPass
- Posts: 604
- Joined: Tue Nov 30, 2021 8:47 am
- Location: West Milford, NJ
- Contact:
Re: The Knight Rider Trans Am at ESTA
Southern Tier Streetcars, Inc., ready to run the hub dyno on the 25th...
You do not have the required permissions to view the files attached to this post.
'73 Camaro Z/28 NETO/N
434 SBC 11:1, 1.294, 6.178 @ 108.87, 9.81 @ 134.93 (3060#, Naturally Aspirated, Sunoco Ultra 94)
Chopper Air Port 917-589-1278
434 SBC 11:1, 1.294, 6.178 @ 108.87, 9.81 @ 134.93 (3060#, Naturally Aspirated, Sunoco Ultra 94)
Chopper Air Port 917-589-1278