Who does this readily ?
I can provide any precise measurements needed and even how to possibly go about it. Essentially I just need someone who has the tooling at hand to machine and blank the rockers axis hole such that a new hole can be repositioned.
I can then do most of the work after that stage to correct its postion on the Head itself.
Who to 4 Modifying inline SOHC Rocker's ?
Moderator: Team
-
- Guru
- Posts: 1528
- Joined: Tue May 02, 2006 8:11 pm
- Location: Kitchener, ONT., Canada
- Contact: