New LS valves, 2.08/1.60
Moderator: Team
New LS valves, 2.08/1.60
I bought a set of rebuilt heads with these valves in them. They don't work with regular SBC rocker geometry because the .170" tip length is too short. The exhaust valves are Howards severe duty, intake brand unknown. These are 8mm bead lock with a length of 5.020".
You do not have the required permissions to view the files attached to this post.
So much to do, so little time...
-
- New Member
- Posts: 3
- Joined: Sat Apr 27, 2024 6:42 pm
- Location: NC,USA
Re: New LS valves, 2.08/1.60
Yes, I forgot I posted it here. They are on facebook and craigslist also.
So much to do, so little time...