Ok, so I have maybe not thought this all the way through.. But an idea I think about now and then.
Diesel head, sink the valve seats, Diesel has more deck thickness? Make your own combustion chamber, probably a nice compact one, probably with a dished piston, but I guess you do want to try to get most of the combustion heat in the chamber and not the piston?
Put a sparkplug where you want it, but realistically where either the injector or glow plug already is.
The prechamber, too hard? Troublesome to modify?
The more I think of it, the harder it sounds to do, the less I think about it, the better the idea sounds...
Modify Diesel head for Gasoline?
Moderator: Team
-
- Guru
- Posts: 4610
- Joined: Sun Sep 18, 2011 11:31 am
- Location: Heading for a bang up with Andromeda as we all are.
Re: Modify Diesel head for Gasoline?
I hope your talking about a light weight 4 cylinder Diesel in a car, otherwise I think the whole exercise is a waste of brain power.
You can cut a man's tongue from his mouth, but that does not mean he’s a liar, it just shows that you fear the truth he might speak about you!
Re: Modify Diesel head for Gasoline?
Pulling tractors add a dist and spark plug to run on alcohol, pretty standard practice with the pro stock class.
Re: Modify Diesel head for Gasoline?
Have done a went a couple different ways for my NA engines I builds for pulling. The first I did was a heart shaped combustion plate between the block and head. The rest were a dished piston with valve reliefs.
Scott
Scott
Tractor Puller, 1959 IH 460 with 430cid NA Alcohol Inline 6 started its life as a D282
The only replacement for displacement is RPM!
The only replacement for displacement is RPM!
Re: Modify Diesel head for Gasoline?
Really cool, sorry for the reeeeally late response, and thread resurrection, but I would not feel OK with not saying thanks.
Thanks, the plate was smart, I thought maybe dished pistons would be the easiest route. Do you make D282 engines? Do you machine new precups and put the spark plug there? This gives me more ideas than I have time and energy for.. Haha..
Re: Modify Diesel head for Gasoline?
Yeah a long time ago that D282 was built over 20 years ago, sold and retired to a street strip fox Mustang. A guy that live near Indianapolis who use to do all Indy Cylinder head iron repair welded up the injector holes and drilled and retapped for spark plugs. The plate worked ok, it created alot of heat as it was steel and shrouded the valves, the dish seemed to work better for these 2 reasons.SpeedMan wrote: ↑Thu Apr 18, 2024 4:30 pmReally cool, sorry for the reeeeally late response, and thread resurrection, but I would not feel OK with not saying thanks.
Thanks, the plate was smart, I thought maybe dished pistons would be the easiest route. Do you make D282 engines? Do you machine new precups and put the spark plug there? This gives me more ideas than I have time and energy for.. Haha..
Tractor Puller, 1959 IH 460 with 430cid NA Alcohol Inline 6 started its life as a D282
The only replacement for displacement is RPM!
The only replacement for displacement is RPM!
Re: Modify Diesel head for Gasoline?
Yeah a long time ago that D282 was built over 20 years ago, sold and retired to a street strip fox Mustang. A guy that live near Indianapolis who use to do all Indy Cylinder head iron repair welded up the injector holes and drilled and retapped for spark plugs. The plate worked ok, it created alot of heat as it was steel and shrouded the valves, the dish seemed to work better for these 2 reasons. You can find the old 460 on YouTube under E&S Motorsports. Here is probably one of highest rpm runs at 6700rpm.SpeedMan wrote: ↑Thu Apr 18, 2024 4:30 pmReally cool, sorry for the reeeeally late response, and thread resurrection, but I would not feel OK with not saying thanks.
Thanks, the plate was smart, I thought maybe dished pistons would be the easiest route. Do you make D282 engines? Do you machine new precups and put the spark plug there? This gives me more ideas than I have time and energy for.. Haha..
Tractor Puller, 1959 IH 460 with 430cid NA Alcohol Inline 6 started its life as a D282
The only replacement for displacement is RPM!
The only replacement for displacement is RPM!
Re: Modify Diesel head for Gasoline?
Really cool. I will try to get some hands-on info and try some stuff out. I also have been starting to wonder how hard is it to cast my own head too, but I sometimes like to think a bit too much about stuff, it is also much easier in the mind and on paper than to do it with the hands, and not least have the equipment to do some of it.
Thanks
Jarl K.
Thanks
Jarl K.