Hi guys
I have a KW FN bar thats been sitting in the corner for years as the air center head was crashed 1 to many times byt I want to put it back into service.
I talked to the KW guy and hes asking $4000 for the parts. I called a couple years ago and was quoted about half that cost to do the same air to manual conversion.
Does anyone have a FN bar with manual centering for parts they are not using??
I get this stuff is hard to locate and the guy that bought the KW inventory is a little off his rocker.
When a decent used bar with no tool kit can be had at a reasonable cost.
If anyone has any suggestions where to look aside from surfing the net I would be eternally grateful
Dave
Kwik Way FN bar
Moderator: Team
-
- Guru
- Posts: 8709
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: Kwik Way FN bar
Have you talked to Stu at Jamison equipment or Kevin at Taylor equipment in Glenwood, Iowa?
-
- Guru
- Posts: 8709
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: Kwik Way FN bar
NEVER THOUGHT ABOUT kEVIN OR STU
I WILL GIVE THEM A CALL MONDAY
I WILL GIVE THEM A CALL MONDAY
Real Race Cars Don't Have Doors