Looking for a new or like new P-310 set up.
Thanks,
Jay
WTB- Sunnen P-310 Valve Guide Gauge set-up
Moderator: Team
-
- Guru
- Posts: 3285
- Joined: Wed Jun 25, 2008 1:46 pm
- Location: NC
-
- Guru
- Posts: 2651
- Joined: Sun Sep 05, 2004 6:38 pm
- Location: salt lake city, ut
- Contact:
Re: WTB- Sunnen P-310 Valve Guide Gauge set-up
---I bought a Diatest split gauge test set for like $400 about 13 years ago
---it will do .180" to .394" stems---has 9 sizes of probes---and .0001" increment gauge
---and I'm happy with it
---it is way shorter than those long Sunnen probes
---it will do .180" to .394" stems---has 9 sizes of probes---and .0001" increment gauge
---and I'm happy with it
---it is way shorter than those long Sunnen probes
Re: WTB- Sunnen P-310 Valve Guide Gauge set-up
Sunnen doesn't (or didn't back when I needed one) offer a probe small enough for the P-310 to measure 5mm guides. At that time, I bought a Diatest split gauge set, too. It's a very good little bore guage. Now Sunnen is offering a GR-5000. Functionally it looks just like the Diatest.
Jim McMahon
Heads1st
http://www.heads1st.com/
Heads1st
http://www.heads1st.com/