EMC

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
CGT
Guru
Guru
Posts: 2063
Joined: Sun May 10, 2009 12:29 pm
Location:

EMC

Post by CGT »

43027178_10155531329372121_4161164564920008704_o.png
43082475_10155531329342121_5432740781666336768_o.png
Didn't see this anywhere, not sure if it should be in General or not.
You do not have the required permissions to view the files attached to this post.
Top
slo-svt
Member
Member
Posts: 132
Joined: Thu May 28, 2015 3:15 pm
Location:

Re: EMC

Post by slo-svt »

Wasn't David Vizard Competing in one of these? I guess it was the other one?
“Pure logical thinking cannot yield us any knowledge of the empirical world; all knowledge of reality starts from experience and ends in it.”

Albert Einstein
Top
Kevin Johnson
HotPass
HotPass
Posts: 9384
Joined: Tue Nov 22, 2005 5:41 am
Location:

Re: EMC

Post by Kevin Johnson »

slo-svt wrote: ↑Fri Oct 05, 2018 3:35 pm Wasn't David Vizard Competing in one of these? I guess it was the other one?
David Vizard previously wrote:It’s been awhile since I last posted. Had some pretty major surgery in the last 3 months including a big time hip replacement for a truly destroyed hip joint. That’s what running can do for you. Between 1980 and 2000 I put on the best part of 40,000 miles of running. Did my last run just after my 70th birthday – only about 3 miles but my hip joint was sure giving me a bad time. Unfortunately I assumed it was arthritis so the fix was delayed by almost 5 years. There are a bunch of other, lesser things, but each put me further back on my work schedule. My Ford book is currently stalled as Is my Race Engine Challenge build. (got the crank & rods, heads are provisionally ported and looking really good but I don’t think it’s the end of the trail yet on heads.)
Driving Force Online: BREAKING NEWS—Ohio Governor Signs SEMA-Supported Vehicle Freedom Bill Into Law!
Top
PRH
Guru
Guru
Posts: 1502
Joined: Fri Sep 08, 2017 4:16 pm
Location: S. Burlington, Vt.

Re: EMC

Post by PRH »

I thought the EMC had more entries than that.
Somewhat handy with a die grinder.
Top
GARY C
HotPass
HotPass
Posts: 6302
Joined: Tue May 14, 2013 10:58 pm
Location:

Re: EMC

Post by GARY C »

I thought Traditional were all old school engines? I hope they do a good write up on at least the top 3.
Please Note!
THE ABOVE POST IN NO WAY REFLECTS THE VIEWS OF SPEED TALK OR IT'S MEMBERS AND SHOULD BE VIEWED AS ENTERTAINMENT ONLY...Thanks, The Management!
Top
CGT
Guru
Guru
Posts: 2063
Joined: Sun May 10, 2009 12:29 pm
Location:

Re: EMC

Post by CGT »

I think their was 15 scheduled, but only 9 pulled from what I can tell.
Top
Steve.k
Guru
Guru
Posts: 1562
Joined: Sat May 28, 2016 10:41 am
Location:

Re: EMC

Post by Steve.k »

Good to see my cam grinder Scott Main and the Cleveland up front. Way to go Scott
Top
Rick360
Guru
Guru
Posts: 1104
Joined: Sun Oct 03, 2004 9:55 pm
Location: Missouri

Re: EMC

Post by Rick360 »

Congrats to Jon Kaase and Scott Main on your EMC wins!!!

Anxious to see the build details. Glad there was better coverage of the contest this year too.

Rick
Top
CGT
Guru
Guru
Posts: 2063
Joined: Sun May 10, 2009 12:29 pm
Location:

Re: EMC

Post by CGT »

Dont know if Chris Pelczar(czar) is on here....good guy and made alot of improvements. Congrats.
Top
randy331
Guru
Guru
Posts: 3337
Joined: Mon Dec 04, 2006 7:30 pm
Location: N.W. MO.

Re: EMC

Post by randy331 »

I wonder what the accepted entry application vs actually showing up with an engine ratio is in this type of contest ?

Bet that ratio is frustrating for those putting on the contest.

Randy
Top
User avatar
RAMM
Expert
Expert
Posts: 545
Joined: Wed May 30, 2007 2:33 pm
Location: Ontario, Canada
Contact:
Contact RAMM

Re: EMC

Post by RAMM »

randy331 wrote: ↑Sat Oct 06, 2018 12:51 am I wonder what the accepted entry application vs actually showing up with an engine ratio is in this type of contest ?

Bet that ratio is frustrating for those putting on the contest.

Randy
What do you mean by this? I believe SAM was the only one that changed from their Cleveland and brought an LS. Even so as long as the entry meets the rules what's the frustrating aspect? J.Rob
New and improved website under construction.Check the blog for relevant info
http://skmfxengines.blogspot.com/
Top
randy331
Guru
Guru
Posts: 3337
Joined: Mon Dec 04, 2006 7:30 pm
Location: N.W. MO.

Re: EMC

Post by randy331 »

RAMM wrote: ↑Sat Oct 06, 2018 9:10 am
randy331 wrote: ↑Sat Oct 06, 2018 12:51 am I wonder what the accepted entry application vs actually showing up with an engine ratio is in this type of contest ?

Bet that ratio is frustrating for those putting on the contest.

Randy
What do you mean by this? I believe SAM was the only one that changed from their Cleveland and brought an LS. Even so as long as the entry meets the rules what's the frustrating aspect? J.Rob
I mean getting accepted, then not bringing an engine, not changing brands.

Randy
Top
User avatar
RAMM
Expert
Expert
Posts: 545
Joined: Wed May 30, 2007 2:33 pm
Location: Ontario, Canada
Contact:
Contact RAMM

Re: EMC

Post by RAMM »

I see. We heard one fellow shipped his engine, he showed up but the engine didn't. J.Rob
New and improved website under construction.Check the blog for relevant info
http://skmfxengines.blogspot.com/
Top
zums
Guru
Guru
Posts: 1355
Joined: Sat Dec 08, 2007 10:57 am
Location: south jersey

Re: EMC

Post by zums »

So how do you search out the members that were involved with each team/build
Tom
Top
czar racing
New Member
New Member
Posts: 5
Joined: Sun Sep 10, 2017 11:18 am
Location: Houston, TX

Re: EMC

Post by czar racing »

CGT wrote: ↑Fri Oct 05, 2018 9:18 pm Dont know if Chris Pelczar(czar) is on here....good guy and made alot of improvements. Congrats.
I'm on here. Thanks for the recognition.

CP
Top
Post Reply

Return to “Engine Tech”