NEW RHS RAISED RUNNER STEELHEADS

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
perfconn
Pro
Pro
Posts: 343
Joined: Wed Nov 04, 2009 9:07 am
Location:

NEW RHS RAISED RUNNER STEELHEADS

Post by perfconn »

Brand new set of RHS 23* raised runner steelheads.These heads were ported by Rons Porting Service.They have 250cc intake runners and 51cc chambers.They are valve jobbed for 2.100 & 1.600 valves.Heads are bare.Pictures & Flow sheet are available by email.They use standard 23* headers.

Price-$3200.00 plus shipping.
E-mail: terry.marciaburnett@gmail.com
Phone: 1-865-567-6943
perfconn
Pro
Pro
Posts: 343
Joined: Wed Nov 04, 2009 9:07 am
Location:

Re: NEW RHS RAISED RUNNER STEELHEADS

Post by perfconn »

Only picture I have right now.[attachment=0]0928171514a_0003.jpg[/attachment]
perfconn
Pro
Pro
Posts: 343
Joined: Wed Nov 04, 2009 9:07 am
Location:

Re: NEW RHS RAISED RUNNER STEELHEADS

Post by perfconn »

Better pictuures.[attachment=0]IMG_20180614_112421.jpg[/attachment]
perfconn
Pro
Pro
Posts: 343
Joined: Wed Nov 04, 2009 9:07 am
Location:

Re: NEW RHS RAISED RUNNER STEELHEADS

Post by perfconn »

Intake side[attachment=0]IMG_20180614_112245.jpg[/attachment]
perfconn
Pro
Pro
Posts: 343
Joined: Wed Nov 04, 2009 9:07 am
Location:

Re: NEW RHS RAISED RUNNER STEELHEADS

Post by perfconn »

Chambers[attachment=0]IMG_20180614_112552.jpg[/attachment]
perfconn
Pro
Pro
Posts: 343
Joined: Wed Nov 04, 2009 9:07 am
Location:

Re: NEW RHS RAISED RUNNER STEELHEADS

Post by perfconn »

Dyno pull of a 360ci round track single 4 barrel with similar heads.[attachment=0]IMG_20161104_194754.jpg[/attachment]
SupStk
Guru
Guru
Posts: 1913
Joined: Wed Jun 22, 2005 6:25 pm
Location: Box Elder, SD

Re: NEW RHS RAISED RUNNER STEELHEADS

Post by SupStk »

Good number for both flow and dyno results.
I'm curious what class of racing these heads are targeted for?
Assume custom intake or spacers are required?
Shaft rockers needed?
Monty Frerichs
B&M Machine
perfconn
Pro
Pro
Posts: 343
Joined: Wed Nov 04, 2009 9:07 am
Location:

Re: NEW RHS RAISED RUNNER STEELHEADS

Post by perfconn »

Shaft rockers with .450 offset on intake are needed.I normally use the Edelbrock 2926 raised runner intake but about any raised runner intake will work without spacers.I have used the 2968 Edelbrock but I think that engine had a Holley 300-41 but they are hard to find.I build these engines for dirt track steelhead class but I think some NHRA econo dragster classes use them.This is a brand new set ported by Rons that I don't need.I think RHS quit making them but a few of them are still available.This dyno sheet is of an engine sold to a dude in South Carolina.[attachment=0]Brant Carey 361ci.jpg[/attachment]
winterhoff
Member
Member
Posts: 96
Joined: Fri Apr 06, 2007 4:59 pm
Location: St. Charles, MO
Contact:

Re: NEW RHS RAISED RUNNER STEELHEADS

Post by winterhoff »

I have several new sets of the RHS raised runner heads untouched still in the box if anybody is interested
Ron
636 447 4042
perfconn
Pro
Pro
Posts: 343
Joined: Wed Nov 04, 2009 9:07 am
Location:

Re: NEW RHS RAISED RUNNER STEELHEADS

Post by perfconn »

Price dropped to $3000.00 plus shipping
Post Reply