cleveland stroker combo

[cjperformance]

What’s that mean, Craig?

Just stirring mate!

[cjperformance]

What’s that mean, Craig?

Considering I pay several hundred dollars a year to run that website and my name is on the registration, I think it’s a fair statement. Don’t you?

^^ thats why ! I know you know the owner.
I tried to register there at one time but it kept having an error, i thought you were rejecting me lol
As i said mate just joking around !

[blykins]

Sorry, the rolling eyes emoji goes right through me every time. Lol

Please try to register again. Can always use more engine builder experience on there.

[cjperformance]

Sorry, the rolling eyes emoji goes right through me every time. Lol

Please try to register again. Can always use more engine builder experience on there.

No problems ! And next time i joke around I'll use
No more rolling eyes!
Cheers,

[Steve.k]

All the cranks need to be checked over quite thoroughly these days. Even the made in usa ones. 4" stroke works very well.Do yourself a favour and call tmeyer his kits from molnar are specifically made for cleveland. No chevy adapted parts.

[blykins]

Hey Craig, do you think we could get an advertiser like that?

And to think, we've all been using the wrong rods for decades.

[Steve.k]

No you can't!!

[cjperformance]

Hey Craig, do you think we could get an advertiser like that?

And to think, we've all been using the wrong rods for decades.

Actually im going to provide a FREE rod alignment service, hows that for advertising !!
Post me your misaligned rods , I'll bend a little kink in the beam, chuck them back in and they will be spot on!

[Mark O'Neal]

What's the bet that Scat, Cat & Eagle are all made in the same Chinese factory....

Cat doesn't exist...but from what I'm hearing the other two are about to be.

[russxr67]

I'd also do a 3.850 with a 6.125 rod.

You can make the other 15 H/P elsewhere.

3.75 is good with a 6.125 rod but the 3.85 has better piston choice with a 6 inch rod.
The 393 does have better piston choice compared with the 408.

[Mark O'Neal]

I just make 'em, and I've been doing this combination since the lat 1980s.

[rfoll]

I'm surprised there was no mention of the 4.125" Dart block as an alternative to gain cubes.

[Steve.k]

If he has a cleveland block and is a cleveland purist likely does not want the windsor block. What hp level is he looking for?And what usage? Fairly easy to get 500+ without stroker.

[russxr67]

If you are a Cleveland purist then there is the Arrow block option in Oz as well. That will easily go 4.125 .

[jsgarage]

Besides the Aussie Arrow, there's Tim Meyers' new Cleveland-design blocks in both aluminum and cast iron, at a h...uvalot less shipping cost (from MI). And it's Made (cast AND machined) in USA, for those who care anymore.