Any feedback yet?
How much do they weigh?
Lighter or heavier than an SHP? Ive read shp is about 168-170 but can't find anything on the brodix/blueprint version.
Going in a modified aiming for 650-675. Will the stock grade 8 hardware and caps hold up?
Brodix or blueprint sbc
Moderator: Team
-
- Guru
- Posts: 8707
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: Brodix or blueprint sbc
having you tried calling Brodix directly and asking. They never publish some details about their products which sucks at times but they do make good stuff. I have seen them but never weighted any.racinnut15xm wrote: ↑Sun Feb 11, 2018 12:53 pm Any feedback yet?
How much do they weigh?
Lighter or heavier than an SHP? Ive read shp is about 168-170 but can't find anything on the brodix/blueprint version.
Going in a modified aiming for 650-675. Will the stock grade 8 hardware and caps hold up?
Real Race Cars Don't Have Doors
Re: Brodix or blueprint sbc
Both castings look remarkably similar to me. Sure they are not the same, different brand?
-
- Pro
- Posts: 279
- Joined: Tue Sep 03, 2013 3:03 pm
- Location:
Re: Brodix or blueprint sbc
My understanding is they are cast at the same foundry and its the same mold. I'm asking some of the questions a little late as i already purchased the brodix version and just have to go pick it up. i figured if anyone has any experience with weights of either its likely they are within a few lbs of each other. Tony barker posted on YB that he has built a SBC and BBC brodix block, and he would like to see a few things changed but that they were overall a good starting point. I messaged him yesterday but have not heard back.