Looking to replace some BHJ lifter true stuff some one used incorrectly
I need the center bar for the cam tunnel the riser plates for the ends and the reamer alignment plate.
Any leads to misc bits and pieces would be greatly appreciated.
willing to swap some BB Mopar fixture plates if someone wants to trade that has extras of BBC stuff
PM me
Dave
WANTED BHJ BBC Lifter True Bar+ Risers and Alignment Plate
Moderator: Team
-
- Guru
- Posts: 8706
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
-
- Guru
- Posts: 8706
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: WANTED BHJ BBC Lifter True Bar+ Risers and Alignment Plate
STILL LOOKING AND STILL NEEDING
If anyone has some they are not using any longer I am going to order new in the 1st of the new year.
If anyone has any extra BHJ ad on stuff for BBC engines for the lifter true set up let me know.
I have a bunch of marine work in the early new year and have to order new if none can be located
PM me with details
Dave
If anyone has some they are not using any longer I am going to order new in the 1st of the new year.
If anyone has any extra BHJ ad on stuff for BBC engines for the lifter true set up let me know.
I have a bunch of marine work in the early new year and have to order new if none can be located
PM me with details
Dave
Real Race Cars Don't Have Doors
Re: WANTED BHJ BBC Lifter True Bar+ Risers and Alignment Plate
ProPower engines wrote: ↑Thu Jan 26, 2017 1:27 am Looking to replace some BHJ lifter true stuff some one used incorrectly
I need the center bar for the cam tunnel the riser plates for the ends and the reamer alignment plate.
Any leads to misc bits and pieces would be greatly appreciated.
willing to swap some BB Mopar fixture plates if someone wants to trade that has extras of BBC stuff
PM me
Dave What BB Mopar fixture plates do you have?
Skip
-
- Guru
- Posts: 8706
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: WANTED BHJ BBC Lifter True Bar+ Risers and Alignment Plate
I have some doubles of various BB mopar bore true stuff
I will check and see what I got left and get back to you over the holidays
I will check and see what I got left and get back to you over the holidays
Real Race Cars Don't Have Doors
-
- Guru
- Posts: 8706
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: WANTED BHJ BBC Lifter True Bar+ Risers and Alignment Plate
Still looking.
If anyone has anything nows the time to speak up before I order from BHJ
Got to get it coming by this week if there is anything available.
Dave
If anyone has anything nows the time to speak up before I order from BHJ
Got to get it coming by this week if there is anything available.
Dave
Real Race Cars Don't Have Doors
Re: WANTED BHJ BBC Lifter True Bar+ Risers and Alignment Plate
Just checked in, pretty sure I know where some is.
SBC bar, end plates, might be SBD also... not sure about cutter tooling as they may use that in the CNC... email me if still looking Dave,
rbperf at Hotmail dot com
SBC bar, end plates, might be SBD also... not sure about cutter tooling as they may use that in the CNC... email me if still looking Dave,
rbperf at Hotmail dot com
-
- Guru
- Posts: 8706
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: WANTED BHJ BBC Lifter True Bar+ Risers and Alignment Plate
Thanks Ryan
Check your in box.
I will wait to here back regarding the tooling
Thanks again
Dave C
Check your in box.
I will wait to here back regarding the tooling
Thanks again
Dave C
Real Race Cars Don't Have Doors