Air filter on Dominator

redliner · Post by **redliner** » Tue Nov 14, 2017 12:33 pm

What is the best airfilter set up to run on a Dominator carb? I saw a test on you tube that was for 4150 style carbs and they used a velocity stack with a tall K&N filter that gained h.p. over no filter scenario. Does anyone make a velocity stack for a Dominator or is this not the way to go? Is a Dominator designed to be run with no air fiter? It seems to me that may be the case.....

mag2555 · Post by **mag2555** » Tue Nov 14, 2017 12:50 pm

If you saw that YouTube video then you know that the first factor to be addressed is how much HP your looking to make , the Carb is the second factor.

redliner · Post by **redliner** » Tue Nov 14, 2017 1:59 pm

mag2555 wrote: ↑Tue Nov 14, 2017 12:50 pm If you saw that YouTube video then you know that the first factor to be addressed is how much HP your looking to make , the Carb is the second factor.

True! Camking says it orta go 630+

redliner · Post by **redliner** » Tue Nov 14, 2017 2:00 pm

redliner wrote: ↑Tue Nov 14, 2017 1:59 pm
mag2555 wrote: ↑Tue Nov 14, 2017 12:50 pm If you saw that YouTube video then you know that the first factor to be addressed is how much HP your looking to make , the Carb is the second factor.
True! Camking says it orta go 630+ I have the carb nailed down,tis the filter setup I need

andyf · Post by **andyf** » Tue Nov 14, 2017 3:17 pm

Run a tall one if you have the room for it. K&N makes elements that are 5 and 6 inches tall. If you have room then use one of those. If you don't have the room then do what you can.

cgarb · Post by **cgarb** » Tue Nov 14, 2017 4:41 pm

The salad bowl filter!...lol

redliner · Post by **redliner** » Tue Nov 14, 2017 5:00 pm

cgarb wrote: ↑Tue Nov 14, 2017 4:41 pm The salad bowl filter!...lol

I was actually thinking about it!!!! I still might!!!!

cgarb · Post by **cgarb** » Tue Nov 14, 2017 5:02 pm

The salad bowl makes sense to me logically and it parallels with their dyno results. Air pulling across the carb messes with the airflow. Hard for air to make a 90 deg turn effectively.

redliner · Post by **redliner** » Tue Nov 14, 2017 5:12 pm

cgarb wrote: ↑Tue Nov 14, 2017 5:02 pm The salad bowl makes sense to me logically and it parallels with their dyno results. Air pulling across the carb messes with the airflow. Hard for air to make a 90 deg turn effectively.

I am really hoping to find a dominator velocity stack and put a filter on it. Any ideas?

cpmotors · Post by **cpmotors** » Tue Nov 14, 2017 5:19 pm

http://www.universalspinners.com/ for base/lids

http://www.r2cperformance.com/ for filter

bill jones · Post by **bill jones** » Tue Nov 14, 2017 5:21 pm

-this topic shows a large 16" K&N for a dominator.

http://www.speedtalk.com/forum/viewtopi ... 87#p373687

redliner · Post by **redliner** » Tue Nov 14, 2017 7:30 pm

I think I will try and find a velocity stack for a dominator, anyone know where I can get one?

Don Terrill’s Speed-Talk

Air filter on Dominator

Air filter on Dominator

Re: Air filter on Dominator

Re: Air filter on Dominator

Re: Air filter on Dominator

Re: Air filter on Dominator

Re: Air filter on Dominator

Re: Air filter on Dominator

Re: Air filter on Dominator

Re: Air filter on Dominator

Re: Air filter on Dominator

Re: Air filter on Dominator

Re: Air filter on Dominator