Vortec 355 build
Moderator: Team
-
- Pro
- Posts: 331
- Joined: Fri Jun 20, 2014 8:41 am
- Location:
Vortec 355 build
355 vortec headed sb using ch350c eq heads with 2.02 1.60 valves .518 .536 solid crane 106 ls 10:1 with lt1 f/t pistons and an eliminator intake would like to make 425+ any one build anything similar input greatly appreciated
Re: Vortec 355 build
http://www.hotrod.com/articles/0611em-v ... all-block/
IIRC, David thought the dyno used was roughly 15 hp proud of what he would expect to see. Hopefully the article gives you some direction.
IIRC, David thought the dyno used was roughly 15 hp proud of what he would expect to see. Hopefully the article gives you some direction.
-
- Pro
- Posts: 331
- Joined: Fri Jun 20, 2014 8:41 am
- Location:
Re: Vortec 355 build
I've seen articles ranging from 375 to 460 just looking for real world experience
Re: Vortec 355 build
I just built and dyno'd a 383 with those heads, low RPM deal. Was 11 to 1 comp though, dual plane intake. 540ftlbs @ 3400 470hp @5300 comp cams hyd roller 12-413-8
-
- Pro
- Posts: 331
- Joined: Fri Jun 20, 2014 8:41 am
- Location:
-
- Guru
- Posts: 5566
- Joined: Sun Feb 19, 2006 10:19 am
- Location: MA
Re: Vortec 355 build
Those ch350c heads respond very well to a good valve job and blend into the bowl.
Automotive Machining, cylinder head rebuilding, engine building. Can't seem to quit