Sbc Solid Roller, Super Victor Intake, Converter
Moderator: Team
-
- Member
- Posts: 171
- Joined: Sun May 14, 2017 3:29 pm
- Location:
Sbc Solid Roller, Super Victor Intake, Converter
I have a Comp Cams .630 lift 264/268@.050 110 LC solid roller with Comp lifters. New. I installed in engine and Never started. $500
SBC Super Victor 2925 bolted on engine and never ran. $250
Transmission specialties super 8. 9" converter 500 street miles behind a SBC. Really nice converter. $600
SBC Super Victor 2925 bolted on engine and never ran. $250
Transmission specialties super 8. 9" converter 500 street miles behind a SBC. Really nice converter. $600
-
- Member
- Posts: 171
- Joined: Sun May 14, 2017 3:29 pm
- Location:
Re: Sbc Solid Roller, Super Victor Intake, Converter
wilson1970 wrote:I have a Comp Cams .630 lift 264/268@.050 110 LC solid roller with Comp lifters. New. I installed in engine and Never started. Also have dual matching springs from Comp. $500
SBC Super Victor 2925 bolted on engine and never ran. $250
Transmission specialties super 8. 9" converter. Really nice converter. $600
-
- Member
- Posts: 171
- Joined: Sun May 14, 2017 3:29 pm
- Location:
Re: Sbc Solid Roller, Super Victor Intake, Converter
Behind my 355 with a .256/.264@.050 camshaft with 4.10 rear gear It would flash at 4200. I really enjoyed driving the car with this converter.
Re: Sbc Solid Roller, Super Victor Intake, Converter
Wonder what it would flash with my 421 in a 4200 lb. car?
It's at 525 ft.lbs. @ 4200.
It's at 525 ft.lbs. @ 4200.
Jim
-
- Member
- Posts: 171
- Joined: Sun May 14, 2017 3:29 pm
- Location:
Re: Sbc Solid Roller, Super Victor Intake, Converter
Not sure there. Definitely more that my 355 small block. You could call Transmission specialties and ask them. This thing is barely used.
-
- Member
- Posts: 171
- Joined: Sun May 14, 2017 3:29 pm
- Location:
Re: Sbc Solid Roller, Super Victor Intake, Converter
Didn't get it.wilson1970 wrote:I sent you a PM.
Jim
-
- Member
- Posts: 171
- Joined: Sun May 14, 2017 3:29 pm
- Location:
Re: Sbc Solid Roller, Super Victor Intake, Converter
Sbc sportman 11 cylinder heads. Manley 2.02 /1.60 street flow valves, ARP 7/16 studs, guide plates. Comp Solid roller springs. Have been ported do not have a any flow numbers. Springs were installed and never ran. Comp solid roller .630 lift .264/268@.050 with Comp lifters. Will sell as a package deal. Cam was installed and never started. $1500 OBO. Also still have brand new 2925 Super Victor Intake.
-
- Member
- Posts: 171
- Joined: Sun May 14, 2017 3:29 pm
- Location:
SBC Sportsman 11 heads, Solid Roller, Super Victor Intake
wilson1970 wrote: ↑Tue Aug 08, 2017 7:12 am I have a Comp Cams .630 lift 264/268@.050 110 LC solid roller with Comp lifters. New. I installed in engine and Never started. $500
SBC Super Victor 2925 bolted on engine and never ran. $250
Transmission specialties super 8. 9" converter 500 street miles behind a SBC. Really nice converter. $600
Re: Sbc Solid Roller, Super Victor Intake, Converter
Do you happen to have any of the parts listed available
Thanks Bill
Thanks Bill
-
- Show Guest
- Posts: 6199
- Joined: Thu Aug 24, 2006 8:16 pm
- Location: santa ana calif-92703
- Contact:
Re: Sbc Solid Roller, Super Victor Intake, Converter
Do you still have the roller cam and lifters ?
JOE SHERMAN RACING
JOE SHERMAN RACING
-
- Member
- Posts: 171
- Joined: Sun May 14, 2017 3:29 pm
- Location:
Re: Sbc Solid Roller, Super Victor Intake, Converter
All above items are still for sale.
Also Comp Cams SBC 1.5 ratio roller rockers used 7/16 stud $150
Thanks.
Also Comp Cams SBC 1.5 ratio roller rockers used 7/16 stud $150
Thanks.