***Post Pics of what you are working on**
Moderator: Team
Re: ***Post Pics of what you are working on**
http://www.iforce.co.nz/View.aspx?i=2vr0xbw3.4ng.jpg
One of my different versions of frankenbishi. Just another dummy assembly without internals.
It's been put off to the side for a bit due to winter but the weather is getting better now so it's back out.
http://www.iforce.co.nz/View.aspx?i=220inuwv.ufx.jpg
Helped with a bit of this but there's always more to do.
http://www.iforce.co.nz/View.aspx?i=w4gc0yod.ab1.jpg
One of my different versions of frankenbishi. Just another dummy assembly without internals.
It's been put off to the side for a bit due to winter but the weather is getting better now so it's back out.
http://www.iforce.co.nz/View.aspx?i=220inuwv.ufx.jpg
Helped with a bit of this but there's always more to do.
http://www.iforce.co.nz/View.aspx?i=w4gc0yod.ab1.jpg
-
- Guru
- Posts: 4607
- Joined: Sun Sep 18, 2011 11:31 am
- Location: Heading for a bang up with Andromeda as we all are.
Re: ***Post Pics of what you are working on**
Well back to making up for my week day spent on my two Heathkit amps last week.
Spent 3/4s of Sunday on a master Intake port in these iron W2 Mopar heads.
Stock flow with 2.05"
.100"----.200"----.300"----.400"----.450"----.500"----.550"-----.600"
48.4------103.3---154-----195------207.5----219.9---226.7----249.7
Ported with 2.08" w 30 back cut.
75.4-----153.6----220.9----273.5---290.4---292.6---299.2----302.4
On now to the Exh side!
Spent 3/4s of Sunday on a master Intake port in these iron W2 Mopar heads.
Stock flow with 2.05"
.100"----.200"----.300"----.400"----.450"----.500"----.550"-----.600"
48.4------103.3---154-----195------207.5----219.9---226.7----249.7
Ported with 2.08" w 30 back cut.
75.4-----153.6----220.9----273.5---290.4---292.6---299.2----302.4
On now to the Exh side!
You do not have the required permissions to view the files attached to this post.
You can cut a man's tongue from his mouth, but that does not mean he’s a liar, it just shows that you fear the truth he might speak about you!
Re: ***Post Pics of what you are working on**
514 BBF with 55mm throttle bodies, LPG vapor injection and megasquirt.
You do not have the required permissions to view the files attached to this post.
- Rick Finsta
- Pro
- Posts: 370
- Joined: Sat Sep 13, 2014 10:22 am
- Location:
Re: ***Post Pics of what you are working on**
Break from car stuff... mobile grill/smoker!
Mike Gallo, President
Protohawk - Design/Prototyping, Small Project Support, and Contract Manufacturing
CCA Racing Products - Torque Plates and Engine Rebuild Tooling
Protohawk - Design/Prototyping, Small Project Support, and Contract Manufacturing
CCA Racing Products - Torque Plates and Engine Rebuild Tooling
-
- Guru
- Posts: 4607
- Joined: Sun Sep 18, 2011 11:31 am
- Location: Heading for a bang up with Andromeda as we all are.
Re: ***Post Pics of what you are working on**
Can you come by NY when you get that baby fired up, love BBQ!!
You can cut a man's tongue from his mouth, but that does not mean he’s a liar, it just shows that you fear the truth he might speak about you!
- BigBlockMopar
- Momentary Specialist
- Posts: 336
- Joined: Fri Mar 25, 2016 8:53 pm
- Location: Netherlands
- Contact:
-
- Guru
- Posts: 3661
- Joined: Tue Aug 19, 2008 7:20 am
- Location: South Australia
-
- Guru
- Posts: 3661
- Joined: Tue Aug 19, 2008 7:20 am
- Location: South Australia
- Rick Finsta
- Pro
- Posts: 370
- Joined: Sat Sep 13, 2014 10:22 am
- Location:
Re: ***Post Pics of what you are working on**
LOL Checking to see if it meets the trailer size restrictions for Drag Week now...
Mike Gallo, President
Protohawk - Design/Prototyping, Small Project Support, and Contract Manufacturing
CCA Racing Products - Torque Plates and Engine Rebuild Tooling
Protohawk - Design/Prototyping, Small Project Support, and Contract Manufacturing
CCA Racing Products - Torque Plates and Engine Rebuild Tooling
-
- Guru
- Posts: 3661
- Joined: Tue Aug 19, 2008 7:20 am
- Location: South Australia
Re: ***Post Pics of what you are working on**
Very low budget Yamaha XS650 turbo, goes great, but now needs a better clutch! , and maybe brakes !
You do not have the required permissions to view the files attached to this post.
Craig.
-
- Guru
- Posts: 4607
- Joined: Sun Sep 18, 2011 11:31 am
- Location: Heading for a bang up with Andromeda as we all are.
Re: ***Post Pics of what you are working on**
Needing to up grade things in responded to changes is part of the norm, it's good your not blowing up stuff yet!
You can cut a man's tongue from his mouth, but that does not mean he’s a liar, it just shows that you fear the truth he might speak about you!
-
- Guru
- Posts: 3661
- Joined: Tue Aug 19, 2008 7:20 am
- Location: South Australia
Re: ***Post Pics of what you are working on**
Yeah these engines are "reasonably" strong if not going crazy. Engine has had a freshen and p/b clearanced to suit the setup. Just a cheap good fun something different for an old friend , 83yrs old and still riding, just!
Craig.
Re: ***Post Pics of what you are working on**
355 with IK180 heads and hydraulic roller going in a 83 C10. Started this project in Missouri and then had a life threating illness along with a heart attack. Spent 3 months in the hospital and had to learn to walk again. went back to my job after missing 5 months of work only to have to medically retire. Had to move mid project to Kansas but I'm getting close to dropping it in and starting on the interior.
You do not have the required permissions to view the files attached to this post.
-
- Expert
- Posts: 793
- Joined: Sat Feb 10, 2007 1:24 pm
- Location:
- Contact:
Re: ***Post Pics of what you are working on**
Infinity G35X
You do not have the required permissions to view the files attached to this post.
Re: ***Post Pics of what you are working on**
Is the machining on the valve to decrease low lift flow and/or help break up the fuel?
Heat is energy, energy is horsepower...but you gotta control the heat.
-Carl
-Carl