2017 Engine Masters ???
Moderator: Team
-
- Guru
- Posts: 2211
- Joined: Sun Jul 25, 2004 7:35 pm
- Location: Texarkana, Ar-Tx
Re: 2017 Engine Masters ???
I am working with Corporate to get the Schedule posted on the Hot Rod EMC web site.
I have expressed to them the urgency.
I will post when it happens.
I have expressed to them the urgency.
I will post when it happens.
Adger Smith
Adger Smith Performance Engines
903 794 7223 shop
903 824 4924 cell
adgersperf@aol.com e-mail
Adger Smith Performance Engines
903 794 7223 shop
903 824 4924 cell
adgersperf@aol.com e-mail
-
- Guru
- Posts: 2211
- Joined: Sun Jul 25, 2004 7:35 pm
- Location: Texarkana, Ar-Tx
Re: 2017 Engine Masters ???
NOTICE
We have had a last minute fuel change for Amsoil Engine Masters Challenge
VP HP101 has been replaced by Sunoco 260GT
We have had a last minute fuel change for Amsoil Engine Masters Challenge
VP HP101 has been replaced by Sunoco 260GT
Adger Smith
Adger Smith Performance Engines
903 794 7223 shop
903 824 4924 cell
adgersperf@aol.com e-mail
Adger Smith Performance Engines
903 794 7223 shop
903 824 4924 cell
adgersperf@aol.com e-mail
Re: 2017 Engine Masters ???
Does anybody have experience with this fuel? How does it compare to VP 101?
-
- Guru
- Posts: 2211
- Joined: Sun Jul 25, 2004 7:35 pm
- Location: Texarkana, Ar-Tx
Re: 2017 Engine Masters ???
FYI.. VP Sunoco Fuel comparison
Brand Fuel Name Color MON RON R+M/2 Specific Gravity 60°F Lead RVP O2 WT% 10% 50% 90% Final H:C O:C A/F
Sunoco 260 GT Undyed 95 105 100 0.7340 No 6.4 3.7 145 211 216 238 2.02 0.034 14.1
VP HP101 Orange 97 105 101 0.713 No 6.7 3.63 144 208 211 227 2.17 0.035 14.2
Zachary Santner
Technical Specialist
Sunoco Race Fuels
8/31/2017
Might be able to read this better: http://sunoco.com.au/vp-fuels-cross-reference-chart/
The VP HP101 we were going to use is a little different than the Motorsports 101 on the chart.
This is a chart of the VP HP101 specs. I hope it shows up and it is readable.
Hope this helps, Adger
Brand Fuel Name Color MON RON R+M/2 Specific Gravity 60°F Lead RVP O2 WT% 10% 50% 90% Final H:C O:C A/F
Sunoco 260 GT Undyed 95 105 100 0.7340 No 6.4 3.7 145 211 216 238 2.02 0.034 14.1
VP HP101 Orange 97 105 101 0.713 No 6.7 3.63 144 208 211 227 2.17 0.035 14.2
Zachary Santner
Technical Specialist
Sunoco Race Fuels
8/31/2017
Might be able to read this better: http://sunoco.com.au/vp-fuels-cross-reference-chart/
The VP HP101 we were going to use is a little different than the Motorsports 101 on the chart.
This is a chart of the VP HP101 specs. I hope it shows up and it is readable.
Hope this helps, Adger
You do not have the required permissions to view the files attached to this post.
Adger Smith
Adger Smith Performance Engines
903 794 7223 shop
903 824 4924 cell
adgersperf@aol.com e-mail
Adger Smith Performance Engines
903 794 7223 shop
903 824 4924 cell
adgersperf@aol.com e-mail
-
- Guru
- Posts: 2211
- Joined: Sun Jul 25, 2004 7:35 pm
- Location: Texarkana, Ar-Tx
Re: 2017 Engine Masters ???
[attachment=0]
You do not have the required permissions to view the files attached to this post.
Adger Smith
Adger Smith Performance Engines
903 794 7223 shop
903 824 4924 cell
adgersperf@aol.com e-mail
Adger Smith Performance Engines
903 794 7223 shop
903 824 4924 cell
adgersperf@aol.com e-mail
-
- Guru
- Posts: 6386
- Joined: Tue Jul 24, 2012 11:15 am
- Location: Roseville, Michigan (just north of Detroit)
- Contact:
Re: 2017 Engine Masters ???
What is an xis file and how do you open it ?Adger Smith wrote: 2017 EMC Run Order.xls[attachment=0]
http://www.rmcompetition.com
Specialty engine building at its finest.
Specialty engine building at its finest.
Re: 2017 Engine Masters ???
STOP POSTING peoples phone numbers and email on an OPEN FORUM.
ADMIN, Please delete the offending post AGAIN!!!
Rick
ADMIN, Please delete the offending post AGAIN!!!
Rick
Re: 2017 Engine Masters ???
Here is order without personal info.
Run Order Dyno Cell Day Team Name Class Team Leader
1 1 Monday RM Competition Traditional Muscle Randy Malik
2 2 Monday Eaton Balancing Vintage Ted Eaton
3 1 Monday Performance Crankshaft Traditional Muscle Adney Brown
4 2 Monday Yestertech Vintage Jerry Christenson
5 1 Monday Creason Racing Engines Traditional Muscle Rick Ferbert
6 2 Tuesday Gene Adams Performance/Smithberg Racing Vintage Bob Holmes
7 1 Tuesday WCH Racing Engines Traditional Muscle Jammie Wells
8 2 Tuesday Kaase - Brechler Vintage Jon Kaase
9 1 Tuesday Semco Performance Traditional Muscle Michael Semchee
10 2 Tuesday RB Vintage Engines Vintage Royce Brechler
11 1 Tuesday Ray's Dyno & Machine Traditional Muscle Ray Clayton
12 2 Wed Griffin Motorsports Vintage Joe Griffin
13 1 Wed BES Racing Engines Traditional Muscle Tony Bischoff
14 2 Wed Performance Carburetion Vintage Randy Malik
15 1 Wed Jim's Tooling Solutions (Grace/Dugan) Traditional Muscle Jim Schmitz
16 2 Wed Kustom Kemps Vintage Lynn Peterson
17 1 Wed Total Performance (alternate only) Traditional Muscle Randy Malik
18 2 Thursday Survival Motorsports Traditional Muscle Barry Rabotnick
19 1 Thursday Czar Racing Traditional Muscle Christopher Pelczar
20 2 Thursday Red Rocket Engine Company (Dodge Small Block) Traditional Muscle Daniel Boshears
21 1 Thursday LRE Traditional Muscle Johan Lindstrom
22 2 Thursday Sinclair Community College HP Traditional Muscle Blaine Heeter
Rick
Run Order Dyno Cell Day Team Name Class Team Leader
1 1 Monday RM Competition Traditional Muscle Randy Malik
2 2 Monday Eaton Balancing Vintage Ted Eaton
3 1 Monday Performance Crankshaft Traditional Muscle Adney Brown
4 2 Monday Yestertech Vintage Jerry Christenson
5 1 Monday Creason Racing Engines Traditional Muscle Rick Ferbert
6 2 Tuesday Gene Adams Performance/Smithberg Racing Vintage Bob Holmes
7 1 Tuesday WCH Racing Engines Traditional Muscle Jammie Wells
8 2 Tuesday Kaase - Brechler Vintage Jon Kaase
9 1 Tuesday Semco Performance Traditional Muscle Michael Semchee
10 2 Tuesday RB Vintage Engines Vintage Royce Brechler
11 1 Tuesday Ray's Dyno & Machine Traditional Muscle Ray Clayton
12 2 Wed Griffin Motorsports Vintage Joe Griffin
13 1 Wed BES Racing Engines Traditional Muscle Tony Bischoff
14 2 Wed Performance Carburetion Vintage Randy Malik
15 1 Wed Jim's Tooling Solutions (Grace/Dugan) Traditional Muscle Jim Schmitz
16 2 Wed Kustom Kemps Vintage Lynn Peterson
17 1 Wed Total Performance (alternate only) Traditional Muscle Randy Malik
18 2 Thursday Survival Motorsports Traditional Muscle Barry Rabotnick
19 1 Thursday Czar Racing Traditional Muscle Christopher Pelczar
20 2 Thursday Red Rocket Engine Company (Dodge Small Block) Traditional Muscle Daniel Boshears
21 1 Thursday LRE Traditional Muscle Johan Lindstrom
22 2 Thursday Sinclair Community College HP Traditional Muscle Blaine Heeter
Rick
Re: 2017 Engine Masters ???
/\ See above for the list without everyone's contact info that's already posted on their websites because they build engines and have customers that need to get ahold of them
-
- Guru
- Posts: 6386
- Joined: Tue Jul 24, 2012 11:15 am
- Location: Roseville, Michigan (just north of Detroit)
- Contact:
Re: 2017 Engine Masters ???
In all the years I have been in this contest, this is the first year where I have gone this late still waiting for parts much less making everything else fit once they get here and hope there is time remaining for the dyno tune.
It's a new experience which I really don't like.
It's a new experience which I really don't like.
http://www.rmcompetition.com
Specialty engine building at its finest.
Specialty engine building at its finest.
-
- New Member
- Posts: 5
- Joined: Sun Sep 10, 2017 11:18 am
- Location: Houston, TX
Re: 2017 Engine Masters ???
Thank you for posting the run order. This is the first time I am seeing it.
Chris
Chris
Re: 2017 Engine Masters ???
I would think everyone entered is working on their engine today. I am trying to paint the Edsel. I believe the last time I painted heads was 1969... not used to iron
-
- Guru
- Posts: 6386
- Joined: Tue Jul 24, 2012 11:15 am
- Location: Roseville, Michigan (just north of Detroit)
- Contact:
Re: 2017 Engine Masters ???
I would be ... if the parts I am waiting to get here, were here.JonKaase wrote: I would think everyone entered is working on their engine today. I am trying to paint the Edsel. I believe the last time I painted heads was 1969... not used to iron
Some of us even paint aluminum heads to match the cast iron blocks; intake manifolds too, sometimes.
Glad to hear you're getting close.
http://www.rmcompetition.com
Specialty engine building at its finest.
Specialty engine building at its finest.
Re: 2017 Engine Masters ???
So where is everyone at right now ??? I am waiting on main bearings , cam and lifters , flywheel ,pushrods ....oil pan , maybe some more stuff....
Re: 2017 Engine Masters ???
Short block assembled.
Heads about done.
Probably paint heads and intake tomorrow.
Heads about done.
Probably paint heads and intake tomorrow.
Survival Motorsports
www.survivalmotorsports.com
WD for Comp, Manley, Blue Thunder, Diamond
Probe, Holley, Clevite, Federal-Mogul, Scat....
www.survivalmotorsports.com
WD for Comp, Manley, Blue Thunder, Diamond
Probe, Holley, Clevite, Federal-Mogul, Scat....