2017 Engine Masters ???

Open to topics unrelated to Speed-Talk.
No politics. No religion topics.

Moderator: Team

Adger Smith
Guru
Guru
Posts: 2211
Joined: Sun Jul 25, 2004 7:35 pm
Location: Texarkana, Ar-Tx

Re: 2017 Engine Masters ???

Post by Adger Smith »

Yep, that is what I sent in and I only posted what corporate sent back.
Someone with a higher pay grade tells me what to do.
Adger Smith
Adger Smith Performance Engines
903 794 7223 shop
903 824 4924 cell
adgersperf@aol.com e-mail
Adger Smith
Guru
Guru
Posts: 2211
Joined: Sun Jul 25, 2004 7:35 pm
Location: Texarkana, Ar-Tx

Re: 2017 Engine Masters ???

Post by Adger Smith »

Randy,
Attached is the e-mail I sent the boss.
Guess he made a management decision.




Thu, Aug 24, 2017 4:11 pm



Adger Smith adgersperf@aol.comHide
To PWalsh PWalsh@enthusiastnetwork.com, MHirata MHirata@enthusiastnetwork.com
Cc LONNIEGRIM LONNIEGRIM@aol.com






I think it is either Randy or Daniel
I don't have access to my list or the Hot Rod site at the moment.



Adger Smith
Adger Smith
Adger Smith Performance Engines
903 794 7223 shop
903 824 4924 cell
adgersperf@aol.com e-mail
Walter R. Malik
Guru
Guru
Posts: 6353
Joined: Tue Jul 24, 2012 11:15 am
Location: Roseville, Michigan (just north of Detroit)
Contact:

Re: 2017 Engine Masters ???

Post by Walter R. Malik »

Adger Smith wrote:Randy,
Attached is the e-mail I sent the boss.
Guess he made a management decision.

Thu, Aug 24, 2017 4:11 pm


Adger Smith adgersperf@aol.comHide
To PWalsh PWalsh@enthusiastnetwork.com, MHirata MHirata@enthusiastnetwork.com
Cc LONNIEGRIM LONNIEGRIM@aol.com


I think it is either Randy or Daniel
I don't have access to my list or the Hot Rod site at the moment.

Adger Smith
Oh well ... This engine was finished 2 years ago. Changing head gaskets and an intake manifold doesn't take very long.
http://www.rmcompetition.com
Specialty engine building at its finest.
Walter R. Malik
Guru
Guru
Posts: 6353
Joined: Tue Jul 24, 2012 11:15 am
Location: Roseville, Michigan (just north of Detroit)
Contact:

Re: 2017 Engine Masters ???

Post by Walter R. Malik »

Talking today with the guy who does the major fabricating for me: He needs a month to get me a finished Sheet Metal tunnel ram for my "POLY" engine. I am still waiting for other parts so, that will be impossible. ](*,)

I bought an aluminum single 4 barrel, 2 plane manifold today and it is on the way ... $150.00 shipping & handling charge for sending this aluminum manifold; on top of the charge of $615.00 intake manifold price. :roll:

At least it is less expensive than that sheet metal tunnel ram would have been. :-k
http://www.rmcompetition.com
Specialty engine building at its finest.
JonKaase
Pro
Pro
Posts: 294
Joined: Mon Nov 20, 2006 8:24 pm
Location:

Re: 2017 Engine Masters ???

Post by JonKaase »

I think you can adapt Chevy LS manifolds to the Poly
User avatar
RAMM
Expert
Expert
Posts: 545
Joined: Wed May 30, 2007 2:33 pm
Location: Ontario, Canada
Contact:

Re: 2017 Engine Masters ???

Post by RAMM »

Walter R. Malik wrote:Talking today with the guy who does the major fabricating for me: He needs a month to get me a finished Sheet Metal tunnel ram for my "POLY" engine. I am still waiting for other parts so, that will be impossible. ](*,)

I bought an aluminum single 4 barrel, 2 plane manifold today and it is on the way ... $150.00 shipping & handling charge for sending this aluminum manifold; on top of the charge of $615.00 intake manifold price. :roll:

At least it is less expensive than that sheet metal tunnel ram would have been. :-k
Is that the Super Pac Poly manifold that came out recently? If so I have tested with it. J.Rob

http://www.forabodiesonly.com/mopar/thr ... ld.341123/
New and improved website under construction.Check the blog for relevant info
http://skmfxengines.blogspot.com/
JonKaase
Pro
Pro
Posts: 294
Joined: Mon Nov 20, 2006 8:24 pm
Location:

Re: 2017 Engine Masters ???

Post by JonKaase »

Let's all pray for our good friends at SAM in Houston. I know many of their homes are flooded and not sure about the school. I don't think that the EMC is a top priority for them right now but I hope they find a way to come and compete. I have really enjoyed my time with Judson and his guys. Kaase
Walter R. Malik
Guru
Guru
Posts: 6353
Joined: Tue Jul 24, 2012 11:15 am
Location: Roseville, Michigan (just north of Detroit)
Contact:

Re: 2017 Engine Masters ???

Post by Walter R. Malik »

RAMM wrote:
Walter R. Malik wrote:Talking today with the guy who does the major fabricating for me: He needs a month to get me a finished Sheet Metal tunnel ram for my "POLY" engine. I am still waiting for other parts so, that will be impossible. ](*,)

I bought an aluminum single 4 barrel, 2 plane manifold today and it is on the way ... $150.00 shipping & handling charge for sending this aluminum manifold; on top of the charge of $615.00 intake manifold price. :roll:

At least it is less expensive than that sheet metal tunnel ram would have been. :-k
Is that the Super Pac Poly manifold that came out recently? If so I have tested with it. J.Rob

http://www.forabodiesonly.com/mopar/thr ... ld.341123/
YES ... Chrysler Power is calling it their SS-X manifold.

All those people down in southeastern Texas have a hardship that I can't even begin to imagine. I sure hope they get through it all with as little demolition as possible.
http://www.rmcompetition.com
Specialty engine building at its finest.
Carroll
Pro
Pro
Posts: 483
Joined: Thu Feb 14, 2008 10:06 am
Location: Shreveport,La.

Re: 2017 Engine Masters ???

Post by Carroll »

We're down in Victory Tx. working the harvey Storm. Told us we are not going to Houston. Think we may be heading to Corpus Christi in a couple of days. Hope the EMC builds are coming along, hate we are not going this year. Best of luck to everyone.. Joe C
Adger Smith
Guru
Guru
Posts: 2211
Joined: Sun Jul 25, 2004 7:35 pm
Location: Texarkana, Ar-Tx

Re: 2017 Engine Masters ???

Post by Adger Smith »

Joe,
Glad to hear you AEP linemen are on the job. I just got notification that one of our EMC participants has been flooded out and will not make it.
Such a tragedy for so many people.
Be careful and God bless you and the others on the rescue and repair crews.
Adger Smith
Adger Smith Performance Engines
903 794 7223 shop
903 824 4924 cell
adgersperf@aol.com e-mail
Adger Smith
Guru
Guru
Posts: 2211
Joined: Sun Jul 25, 2004 7:35 pm
Location: Texarkana, Ar-Tx

Re: 2017 Engine Masters ???

Post by Adger Smith »

It is now official.
The Randy Malik EMC drama is over.
I have just received notification from the Hot Rod Corp office.
As alternate #3 Performance Specialists has been added to the run order to replace another team that has withdrawn.
Congratulations Randy!
Looking forward to seeing all 3 of your teams at EMC.
Adger Smith
Adger Smith Performance Engines
903 794 7223 shop
903 824 4924 cell
adgersperf@aol.com e-mail
Walter R. Malik
Guru
Guru
Posts: 6353
Joined: Tue Jul 24, 2012 11:15 am
Location: Roseville, Michigan (just north of Detroit)
Contact:

Re: 2017 Engine Masters ???

Post by Walter R. Malik »

Adger Smith wrote:It is now official.
The Randy Malik EMC drama is over.
I have just received notification from the Hot Rod Corp office.
As alternate #3 Performance Specialists has been added to the run order to replace another team that has withdrawn.
Congratulations Randy!
Looking forward to seeing all 3 of your teams at EMC.
"Total Performance" was the company sponsoring my alternate entry.

That's the engine which is finished; the others are in the final works.
http://www.rmcompetition.com
Specialty engine building at its finest.
brechlrl
Pro
Pro
Posts: 306
Joined: Mon Nov 30, 2009 3:35 pm
Location:

Re: 2017 Engine Masters ???

Post by brechlrl »

Adger,Do you have any alternates for Vintage class?
Adger Smith
Guru
Guru
Posts: 2211
Joined: Sun Jul 25, 2004 7:35 pm
Location: Texarkana, Ar-Tx

Re: 2017 Engine Masters ???

Post by Adger Smith »

The vintage class has no alternates,
It started out with 10 and has shrunk down to 8.
If the Dyno schedule I have proposed gets accepted the Vintage
Class will be all run out on Wednesday afternoon & Traditional Muscle will be over on Thursday.
We have scheduled 14 to be run in the Traditional Muscle class.
We started out with 4 alternates for the Traditional Muscle.
We now have one alternate left for the Traditional Muscle class.
If anyone is not going to attend that has been accepted please notify me.
If you are in the "might not make it" category please notify me.
Thanks,
Looking forward to seeing everyone at the AmsOil EMC.
Adger Smith
Adger Smith Performance Engines
903 794 7223 shop
903 824 4924 cell
adgersperf@aol.com e-mail
perfcrank
New Member
New Member
Posts: 15
Joined: Tue Sep 16, 2014 8:03 am
Location:

Re: 2017 Engine Masters ???

Post by perfcrank »

\when is the dyno schedule due ?
Post Reply