(NEW DESIGN) laser cut 1/4" mild steel mid mount alternator bracket for a big block chevy with long water pump and 9.8 deck height. Works great, uses a much shorter belt to reduce belt throwing and positions the alternator much lower for a cleaner look. Weighs one pound less than the stock 2 piece bracket. Uses your stock alternator pivot bolt and spacer $50 shipped USA or Canada 306-752-5558
$50 USD shipped to USA
$50 canadian dollars shipped to Canada
pay by paypal or E-transfer
BBC alternator bracket
Moderator: Team
-
- Guru
- Posts: 1608
- Joined: Sat Dec 24, 2011 10:02 am
- Location: melfort saskatchewan Canada
BBC alternator bracket
You do not have the required permissions to view the files attached to this post.
The Word of God is quick and powerfull
www.therocketshop.blogspot.com
www.therocketshop.blogspot.com
-
- Guru
- Posts: 1608
- Joined: Sat Dec 24, 2011 10:02 am
- Location: melfort saskatchewan Canada
Re: BBC alternator bracket
still available.
The Word of God is quick and powerfull
www.therocketshop.blogspot.com
www.therocketshop.blogspot.com
Re: BBC alternator bracket
Is this a one-and-only or something you make? I might need something similar with different mounting holes.
Jack Vines
Studebaker-Packard V8 Limited
Obsolete Engineering
Studebaker-Packard V8 Limited
Obsolete Engineering
-
- Pro
- Posts: 264
- Joined: Tue Mar 06, 2012 12:53 pm
- Location: MotorKraft Mit Uns - East of the Pecos, Tejas
-
- Guru
- Posts: 1608
- Joined: Sat Dec 24, 2011 10:02 am
- Location: melfort saskatchewan Canada
Re: BBC alternator bracket
Its a very simple bracket that just flips the alternator upside down from its stock location. It still pivots on the same bolt. It is $50 shipped.
The Word of God is quick and powerfull
www.therocketshop.blogspot.com
www.therocketshop.blogspot.com
-
- Guru
- Posts: 8706
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: BBC alternator bracket
Much better design then the original bracket where too many misalignments can be found in custom engines where using the end intake bolt and a bolt near the stat housing then find the pulley is cocked creating a belt running off center line and wearing the side more.
Real Race Cars Don't Have Doors