Russian made ti valves
Moderator: Team
-
- New Member
- Posts: 11
- Joined: Sun Jan 13, 2008 12:13 pm
- Location:
Russian made ti valves
anyone have any knowledge about the quality of Russian made titanium valves for a BB Chevy?
Re: Russian made ti valves
I've heard the first move should be to wave a Geiger Counter in their vicinity. Something about scrapped nuclear subs...
Felix, qui potuit rerum cognscere causas.
Happy is he who can discover the cause of things.
Happy is he who can discover the cause of things.
-
- HotPass
- Posts: 9406
- Joined: Tue Nov 22, 2005 5:41 am
- Location:
Re: Russian made ti valves
MadBill wrote:I've heard the first move should be to wave a Geiger Counter in their vicinity. Something about scrapped nuclear subs...
That was the first thing that popped into my head too.
https://www.semasan.com/breaking-news-archives?utm_campaign=DrivingForce_DF272&utm_content=SeeAllLeg
Re: Russian made ti valves
well, i always figured radioactive gasoline would make more power per gallon, so maybe radioactive valves will also enhance power production. LOL
Re: Russian made ti valves
Who sells them?redvetracr wrote:anyone have any knowledge about the quality of Russian made titanium valves for a BB Chevy?
Re: Russian made ti valves
I have a 40 year old Russian made dial gauge that I have had since it was new. If I set the gauge to '0', & tap the gauge, it returns to anywhere BUT zero.........
-
- Expert
- Posts: 670
- Joined: Mon May 28, 2012 6:46 pm
- Location:
Re: Russian made ti valves
I believe the majority of the world's Ti comes from Russia.That's where the metal for the SR22 came from.
The Nazis didn't lose WWII,they just changed uniforms.Now they run the place.
-
- New Member
- Posts: 11
- Joined: Sun Jan 13, 2008 12:13 pm
- Location:
Re: Russian made ti valves
cspeier wrote:Who sells them?redvetracr wrote:anyone have any knowledge about the quality of Russian made titanium valves for a BB Chevy?
the motor with these valves was built in 2006, I was told "Herbert" supplied the Russian made ti valves, I do not know if thats Chet Herbert or Doug Herbert
Re: Russian made ti valves
I have a friend who works for DARPA... who speaks, reads, and writes Russian and who was also assigned there . Get a manufacturers name and I can ask him if he get get some data. BTW their submarines are just about all titanium: ladders steps railings hull decks etc. way more titanium in their subs than ours.
-
- Guru
- Posts: 2997
- Joined: Mon Jun 14, 2010 3:16 pm
- Location: Lake Elizabeth, CA
Re: Russian made ti valves
I always figured at some point Russian parts manufactuers would get into selling USA parts to us the same way China does. Titanium parts would be the first logical start since titanium is probably cheap in Russia.
Joe Facciano
-
- Guru
- Posts: 2997
- Joined: Mon Jun 14, 2010 3:16 pm
- Location: Lake Elizabeth, CA
Re: Russian made ti valves
Russia has a long history on making good quality military equipment. I'd figure at some point they would get into making good quality civilian equipment like China. I'm surprised they haven't already.
Joe Facciano
Re: Russian made ti valves
A long history of making good military equipment? I don't think so.
A Russian pilot, Victor Belenko I believe was his name, defected to the west in Russia's latest Mig 25 Foxbat fighter in 1976. He flew from the western tip of Russia to Japan.....because that short distance was all that was possible with the very short fuel range...the fuel range was short because of the fuel hungry HUGE engines.....the engines were huge because the plane was so heavy...it was so heavy because of the extensive use of steel, not alum to reduce weight. And the electronics...used 30 yr old vacuum tubes!
A Russian pilot, Victor Belenko I believe was his name, defected to the west in Russia's latest Mig 25 Foxbat fighter in 1976. He flew from the western tip of Russia to Japan.....because that short distance was all that was possible with the very short fuel range...the fuel range was short because of the fuel hungry HUGE engines.....the engines were huge because the plane was so heavy...it was so heavy because of the extensive use of steel, not alum to reduce weight. And the electronics...used 30 yr old vacuum tubes!
Re: Russian made ti valves
Vacuum tubes.. when the big,white blast happens the transistors are fried when the tubes run as nothing happened.. That's the reason.
And for sure;Russians CAN make some fine equipment if there is will and funding.
Soviet era made a generation that as long it appears that something is done it's good;general plan as Central Committee has orderd.
Falkland war;Brits against Argentina.. More Harriers come down because of running out of fuel than being shot down..
And for sure;Russians CAN make some fine equipment if there is will and funding.
Soviet era made a generation that as long it appears that something is done it's good;general plan as Central Committee has orderd.
Falkland war;Brits against Argentina.. More Harriers come down because of running out of fuel than being shot down..
Last edited by Morgo on Thu Jan 12, 2017 4:20 pm, edited 1 time in total.
"when uncomptent order unwilling to do unnecsessary the probablity of failure is high"