Sm Blk Chevy Ring Set Number

[ProPower engines]

Hey guys

I am havng trouble finding a ring set for some 238 +30 pistons.
They are a 1/16 1/16 1/8 and I am looking for a set with a standard tention oil ring.
The only rings set numbers I am coming up with have a low tention oil ring.
If anyone has a calaloge that lists such a ring and would not mind posting whats available that would be great

I was going to get a set from Total seal but the cost is retarded compared to a conventional ring set.
Thanks again
Dave

[wyrmrider]

two steps forward one step back
Speed Pro catalog shows
R-9755 chrome
R-9211 file fit
R-9967 standard gap
Hastings cross references 2M5522
for all

[GOSFAST]

The number above, for "moly's", the R9967's are correct, std. gaps and S/T, the R9211's are F/F, L/T.

You also have R10315's, F/F, S/T.

Thanks, Gary in N.Y.

P.S. The only issue I forsee with the latter number is going to the available oversizes, they may be tough to find in +035"?? Can find out Monday if necessary.

[ProPower engines]

two steps forward one step back
Speed Pro catalog shows
R-9755 chrome
R-9211 file fit
R-9967 standard gap
Hastings cross references 2M5522
for all

the speedpro ring is out of stock to the factory and no word on the hastings number till monday
Thanks for the help guys

[ProPower engines]

The number above, for "moly's", the R9967's are correct, std. gaps and S/T, the R9211's are F/F, L/T.

You also have R10315's, F/F, S/T.

Thanks, Gary in N.Y.

P.S. The only issue I forsee with the latter number is going to the available oversizes, they may be tough to find in +035"?? Can find out Monday if necessary.

Thanks Gary
You are right no .035's I tried almost everywhere to find some

[wyrmrider]

the Hastings are standard tension

269-945-2491

Mahle/ clevite NG

Grant 55001

[user-3597028]

I can't believe a CR series Total Seal set is more that $75. I've always found them to be cheaper than Sealed power or Perfect Circle.

[Wolfplace]

I can't believe a CR series Total Seal set is more that $75. I've always found them to be cheaper than Sealed power or Perfect Circle.

That kind of depends on if you are a WD or not
Jobber is about $100 & Pro Jobber is about $113

Dave
If you still need them PM me & I will get them at cost for you but shipping on one set to you is probably going to suck,,,,

[ProPower engines]

Thanks Mike
I was going to call hastings back on monday but not sure what the cost will be,.
I will call you monday or if you want to PM me a cost I may just get them from you and save the extra call
Thanks again
Dave

[Wolfplace]

Thanks Mike
I was going to call hastings back on monday but not sure what the cost will be,.
I will call you monday or if you want to PM me a cost I may just get them from you and save the extra call
Thanks again
Dave

PM sent

[ProPower engines]

Thanks Mike
I was going to call hastings back on monday but not sure what the cost will be,.
I will call you monday or if you want to PM me a cost I may just get them from you and save the extra call
Thanks again
Dave

PM sent

Recieved
Thanks Mike

[ProPower engines]

Thanks guys
Got er handled