I have an AXE Jet wash machine for sale. I am upgrading to a larger machine. It is currently in use and will not be taken out of service until the new one is in. This will mid Feb - Mar.
This is a one owner machine. It needs some work on the door and hinges. 20" turn table. 32" work height. You can fit a 460 Ford without head studs. Looking at Axe's web site I would call it an "Eliminator (SW-20 Series) Spraywasher" . It has gas heat. The soak tank can fit an engine block but I never found soaking them to make a difference. All baskets, fixtures, and gizmos go with it. It is a 230V 3 Phase machine. 5HP pump.
Looking for $1500. This should cover the shipping on my new machine.
http://www.axeequipment.com/specsheetsw20.html
AXE Jet washer for sale
Moderator: Team
Re: AXE Jet washer for sale
A few pictures:
You do not have the required permissions to view the files attached to this post.
Re: AXE Jet washer for sale
A few more pictures:
This is in 12472 zip code.
http://search.yahoo.com/r/_ylt=A0oG7txt ... %252012472
This is in 12472 zip code.
http://search.yahoo.com/r/_ylt=A0oG7txt ... %252012472
You do not have the required permissions to view the files attached to this post.
-
- Pro
- Posts: 274
- Joined: Tue Jul 24, 2012 9:18 pm
- Location:
Re: AXE Jet washer for sale
Please elaborate on "needs work on door and hinges". Does it leak? Is the door bent? Etc.
Re: AXE Jet washer for sale
The door inner skin has rusted through, as shown in the picture. The outer skin keeps it from leaking. The hinge is nothing more then a threaded tube with a 3/8 bolt through a tab. The threads are stripped on one side and the bolt works its way out. I push it backing and it is good for a month. Nothing is bent. The machine is in service daily.blockislandguy wrote:Please elaborate on "needs work on door and hinges". Does it leak? Is the door bent? Etc.
Re: AXE Jet washer for sale
New machine is a month late but it's back from final prep and about ready to ship. I should have it before the end of the month.