604 crate 4bl or 360ci 2brl? please help me decide
Moderator: Team
604 crate 4bl or 360ci 2brl? please help me decide
Dirt latemodel, motor option legal 604 with 4 barrel carb 2350#. Or no touch 4412, 360ci no port bowtie head,flat tappet cam .874 lifter 11.1 max comp.wet sump.part #2701 or 5001 eldelbrock intake. #2400. No rpm limits on either. Must use sunoco 110 track fuel on both options. Most guys run the 2brl motor with very light rotating stuff and turn them 8000+ rpm. I rather do a 604 cuz there simple and marketable. What do you guys think? Thanks to all who read
Re: 604 crate 4bl or 360ci 2brl? please help me decide
It all depends on your definition of "legal 604"
The 2bbl will beat an out of the box 604.
A 604 that's been built to make as much power as possible, and still pass tech will beat the 2bbl.
The 2bbl will beat an out of the box 604.
A 604 that's been built to make as much power as possible, and still pass tech will beat the 2bbl.
Mike Jones
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Re: 604 crate 4bl or 360ci 2brl? please help me decide
are they making you run a chip on the 604? thats what they do here and it limits rpm to around 6800 so the 360 will kill the 604.
https://www.facebook.com/23RootRacing Come see me!
-
- Guru
- Posts: 4653
- Joined: Thu Jul 01, 2004 6:34 am
- Location: NORTHEAST
- Contact:
Re: 604 crate 4bl or 360ci 2brl? please help me decide
If your going to turn a 2 barrel 8000 I would go with a 6.250 rods as those builds don't fall of as fast as the 5.7 roded engines.punkracer wrote:Dirt latemodel, motor option legal 604 with 4 barrel carb 2350#. Or no touch 4412, 360ci no port bowtie head,flat tappet cam .874 lifter 11.1 max comp.wet sump.part #2701 or 5001 eldelbrock intake. #2400. No rpm limits on either. Must use sunoco 110 track fuel on both options. Most guys run the 2brl motor with very light rotating stuff and turn them 8000+ rpm. I rather do a 604 cuz there simple and marketable. What do you guys think? Thanks to all who read
Website is up and running
http://hinksonautomotive-cncblocks.com/
Machine shop tour
http://hinksonautomotive-cncblocks.com/shop-tour/
Monthly Specials
http://hinksonautomotive-cncblocks.com/specials/
55MM babbit cam bearings with 1 hole
http://hinksonautomotive-cncblocks.com/
Machine shop tour
http://hinksonautomotive-cncblocks.com/shop-tour/
Monthly Specials
http://hinksonautomotive-cncblocks.com/specials/
55MM babbit cam bearings with 1 hole
Re: 604 crate 4bl or 360ci 2brl? please help me decide
our teck is pretty lax. they will pump and whistle the 604 and look for a gm bolt. check fuel but thats about it. anybody know where i can get a 604 thta will pass these rules? and yes, money is an object
-
- Pro
- Posts: 226
- Joined: Tue Jul 08, 2008 8:04 pm
- Location: tampa, fl.
- Contact:
Re: 604 crate 4bl or 360ci 2brl? please help me decide
Call (R.E.D.) Race Engine Design talk to Ronnie. He builds some of the fastest create motor's in the country and the price isn't that bad. Tell him that I told you to call. I don't know where you are located but he is in N.-GA. around the Tenn. Ga. border.
http://www.devanecarbs.com
http://www.devanecarbs.com
DeVane carburetors are precision assembled and calibrated to YOUR combo. Are you ready for the next level of performance?
Re: 604 crate 4bl or 360ci 2brl? please help me decide
ok, just found out i can use e-85 on the crate only. will that be a boost over the 110 sunoco? what about chp type fuel? i should beable to get my hands on pure ethanol and mix it e-85 with a race gas. any ideas if im getting closer to the 2 barrel motor if i go that route?
Re: 604 crate 4bl or 360ci 2brl? please help me decide
When you say legal crate 604, is that one with Nesmith or Fast track seals