Looks like Jon Kasse has a new canted valve small block Ford cylinder head available.
http://www.mooregoodink.com/news/?p=2639
http://www.mooregoodink.com/news/wp-con ... lheads.pdf
KAASE’S NEW P38 CYLINDER HEADS FOR 302 & 351 SB FORDS
Moderator: Team
-
- Guru
- Posts: 1500
- Joined: Thu Sep 03, 2009 6:06 pm
- Location: Dripping Springs, Texas
Re: KAASE’S NEW P38 CYLINDER HEADS FOR 302 & 351 SB FORDS
That guy's just bad ass
Live in such a way that those who know you but don't know God will come to know God because they know you.
-
- Guru
- Posts: 2858
- Joined: Thu Jan 06, 2011 8:57 am
- Location:
Re: KAASE’S NEW P38 CYLINDER HEADS FOR 302 & 351 SB FORDS
It looks very similar to that Jeg's/Kaase head from a few years ago. I wonder what's different and if it's an improved design?
I respect Jon Kaase greatly he's a heck of an engine builder and a nice guy too. He's always treated me very well.
I respect Jon Kaase greatly he's a heck of an engine builder and a nice guy too. He's always treated me very well.
Re: KAASE’S NEW P38 CYLINDER HEADS FOR 302 & 351 SB FORDS
Yes, I wondered the same thing about the P38 heads compared to the ones that Jeg's was marketing before. I will be looking forward to finding out more information about them including flow numbers. I'm sure it is a great head and will likely want to try a set out hopefully sometime in the not too distant future.DaveMcLain wrote:It looks very similar to that Jeg's/Kaase head from a few years ago. I wonder what's different and if it's an improved design?
I respect Jon Kaase greatly he's a heck of an engine builder and a nice guy too. He's always treated me very well.
Re: KAASE’S NEW P38 CYLINDER HEADS FOR 302 & 351 SB FORDS
I met a customer half-way and dyno'd a Boss 529 down at Kaase's shop a few months ago. He was doing some machine work on some of these heads and they looked pretty impressive. The port volume may be a little big for the smaller engines, but they should make some serious power. They should be available at any time now.
Lykins Motorsports
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
-
- Pro
- Posts: 480
- Joined: Wed Mar 05, 2008 6:36 pm
- Location:
Re: KAASE’S NEW P38 CYLINDER HEADS FOR 302 & 351 SB FORDS
Just out of curiosity, what would be the advantage over the small port 351 Cleveland heads?
Is the defect in what I see, or what I'm seeing with ?
Re: KAASE’S NEW P38 CYLINDER HEADS FOR 302 & 351 SB FORDS
The flow numbers that Chuck relayed to me were much higher than any small port Cleveland head. You're also looking at a Windsor head, which would use a standard Windsor intake, Windsor valve covers, etc.
Lykins Motorsports
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
Re: KAASE’S NEW P38 CYLINDER HEADS FOR 302 & 351 SB FORDS
The other nice thing about these heads, for those of us who have limited engine bay space such as is the case in early model 65/66 Mustangs, is that they have the stock exhaust port location. This helps to allow the use of the limited number of long tube headers that are available for these applications without having to try to custom build something or having to convert to a different style of front suspension system that would allow the removal or notching of the shock towers.