Be careful of these.
They can heat cycle out and will not cool.
I bought one that looked GREAT. All tig welded AN fittings, extra thick tanks all sheet aluminum and welded not formed, and BIG. Did not cool well at all. It ran cooler at idle than 120 mph. It was getting plenty of wind.
I later learned that if these rads get too hot, the tubes will expand and crush the fins.
When it cools back down there is now a gap between the fins and the tubes.
With the gap no heat transfer occurs.
I have sold a cycled out radiator, that I bought new, that was no good for racing but worked great in a street car. I told the guy, a friend of mine, to bring it back if he had any problems. Worked well enough for him.
Think of the application before buying.
Think why are they selling this great new rad at such a low price.