Who carry Belzona in USA?
Moderator: Team
-
- Vendor
- Posts: 1163
- Joined: Thu Dec 28, 2006 8:41 am
- Location: Denver, N.C.
- Contact:
Who carry Belzona in USA?
Is this still the best product to use for castiron repair and alky?
3V Performance
" ENGINES WITH AN ATTITUDE "
980-222-7230
" ENGINES WITH AN ATTITUDE "
980-222-7230
After doing some searching there is sevral places United States
here is a contact link.
http://www.belzona.com/contact.aspx
Malvin
here is a contact link.
http://www.belzona.com/contact.aspx
Malvin
-
- Pro
- Posts: 209
- Joined: Thu Aug 30, 2007 1:43 pm
- Location:
-
- Guru
- Posts: 5566
- Joined: Sun Feb 19, 2006 10:19 am
- Location: MA
-
- Pro
- Posts: 209
- Joined: Thu Aug 30, 2007 1:43 pm
- Location:
-
- Vendor
- Posts: 1163
- Joined: Thu Dec 28, 2006 8:41 am
- Location: Denver, N.C.
- Contact:
x23V Performance wrote:Would have to agree, but comes with a hefty price.racecar100 wrote:The Best Epoxy on th marketfastvette wrote:What is belzona?
I just use splashzone covered with ultra gray silicone for methanol stuff. hasn't failed me yet.
Last edited by rooster on Fri Jul 17, 2009 2:07 pm, edited 1 time in total.
-
- Vendor
- Posts: 1163
- Joined: Thu Dec 28, 2006 8:41 am
- Location: Denver, N.C.
- Contact:
Belzona
I have use Belzona for 25 years and it a good product, but I have found the Enecon product line to be much better. It has an unlimited shelf life, better adhesion and is MADE IN THE USA. NOT ENGLAND
If you want more info go to www.enecon.com or give me a call at my Tennessee location 615-794-8868
If you want more info go to www.enecon.com or give me a call at my Tennessee location 615-794-8868
Re: Belzona
Which specific product would be "much better" than 1111 for adhesion and shaping in an alloy head running alcohol fuels..?EneconTN wrote:I have use Belzona for 25 years and it a good product, but I have found the Enecon product line to be much better. It has an unlimited shelf life, better adhesion and is MADE IN THE USA. NOT ENGLAND
If you want more info go to www.enecon.com or give me a call at my Tennessee location 615-794-8868
-Bjørn
"Impossible? Nah...just needs more development time"
"Impossible? Nah...just needs more development time"
-
- Vendor
- Posts: 1163
- Joined: Thu Dec 28, 2006 8:41 am
- Location: Denver, N.C.
- Contact:
Re: Belzona
SWR wrote:Which specific product would be "much better" than 1111 for adhesion and shaping in an alloy head running alcohol fuels..?EneconTN wrote:I have use Belzona for 25 years and it a good product, but I have found the Enecon product line to be much better. It has an unlimited shelf life, better adhesion and is MADE IN THE USA. NOT ENGLAND
If you want more info go to www.enecon.com or give me a call at my Tennessee location 615-794-8868
The #1111 I used was a treat to work with. Easy to mix and apply. Has been in action for 3 weeks now with no problems.
3V Performance
" ENGINES WITH AN ATTITUDE "
980-222-7230
" ENGINES WITH AN ATTITUDE "
980-222-7230
Re: Belzona
I know that 1111 is a good product - apart from smell - as I have used it myself several times. That's why I asked what of the Enecon products that supposedly were better. I suspect the post I replied to, to be an unapproved advertizing attempt...3V Performance wrote:The #1111 I used was a treat to work with. Easy to mix and apply. Has been in action for 3 weeks now with no problems.
-Bjørn
"Impossible? Nah...just needs more development time"
"Impossible? Nah...just needs more development time"