Heat/AC, electrical, lighting, flooring, design, construction, photos...
3 posts • Page 1 of 1
- Posts: 299
- Joined: Mon Nov 26, 2007 11:44 pm
- Location: alabama
How would I do this so I could winch disabled vehicles up by myself? I used to winch them on a trailer then unload but there has to be a way of winching them to the shop. has concrete floor.
- New Member
- Posts: 24
- Joined: Tue Sep 16, 2014 7:46 pm
You could also cut a hole into the floor and "underpin" the concrete [at least as thick as the floor] with a vertical receiver sleeve with some rebar through the sleeve [and into the slab, low leave lots of concrete over it] then fill with "unshrinkable concrete". You may also need to create some sort of drainage as you are still outside, and only partially protected from the rain/snow. This with a flush cover [magnetic?] and no trip [or hose, creeper etc.] hazard. This is my plan for my garage floor as I am just not as strong as I once was this and a machining intensive lock system that I just haven't figured out how to do with out all the work! Harry