Wanted someone to make shaft with CNC

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
digger
Guru
Guru
Posts: 1320
Joined: Sun Jan 27, 2008 6:39 am

Wanted someone to make shaft with CNC

Post by digger » Sat Mar 24, 2018 1:22 am

Got a 1 off shaft I need made it's about 1.6"OD x7" long overall. I have drawing and cad model. Needs to have some journals ground and polished similar to crankshaft but there are no offsets involved.

If a anyone can help out or knows someone let me know.

Cheers

Keith Morganstein
Guru
Guru
Posts: 5349
Joined: Sun Feb 19, 2006 10:19 am
Location: MA

Re: Wanted someone to make shaft with CNC

Post by Keith Morganstein » Sun Apr 15, 2018 11:49 am

digger wrote:
Sat Mar 24, 2018 1:22 am
Got a 1 off shaft I need made it's about 1.6"OD x7" long overall. I have drawing and cad model. Needs to have some journals ground and polished similar to crankshaft but there are no offsets involved.

If a anyone can help out or knows someone let me know.

Cheers
Are there machine shops local to you? Almost all have CNC machines,( some don’t have any manual machines). If they have an OD grinder, they can finish it, otherwise the local crank grinder can. I’m sure Mike Jones of Jones Cams can, and others on the forum, but unless you’re in a remote area, it shouldn’t be hard to get made locally.

I’m not sure how many views you get on this page, might post on general and shop tech too.
Automotive Machining, cylinder head rebuilding, engine building. Old school shop, semi-retired moonlighter. Can't seem to quit #-o

Post Reply