mopar cylinder heads

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
wyrmrider
Guru
Guru
Posts: 6941
Joined: Thu Jan 10, 2013 10:52 pm
Location:

mopar cylinder heads

Post by wyrmrider »

Big Block
67-915 Q4
68-70 906 Q3
73 213 Q2
74 902 Q3

Small Block
915 "J" several can check valve sizes
974 75-56 360 w/smog
596 360 77-86 w/ ex seats w/ smog
587 360 76 360 no smog holes

6671 no stands oval center ports :)

LA area shoot me a pm if interested

also half a dozen 440 blocks and a 60 413
wyrmrider
Guru
Guru
Posts: 6941
Joined: Thu Jan 10, 2013 10:52 pm
Location:

Re: mopar cylinder heads

Post by wyrmrider »

looking in a bin marked 455 Buick were a matched pair of 413 Motorhome heads 7/16 exhaust stem diameter, hard ex seats
I also have a early what may be a 4 speed (not the trans guy) 3 levers on the side, Companion flange not slip yoke
must be very early 60's I'll see if I can find some numbers small diameter fine spline input
Our first Super Stocker had a big heavy 3 speed and IDK what happened to it when we went Auto (then 4 speed then auto then...
don't know where the exhaust manifolds went either- wish I had them
wyrmrider
Guru
Guru
Posts: 6941
Joined: Thu Jan 10, 2013 10:52 pm
Location:

Re: mopar cylinder heads

Post by wyrmrider »

updated List
Big Block
67-915 Q6
68-70 906 Q6 2 with guides and seats
73 213 Q3 plus 2 with guides and seats
74 902 Q3
452 2 w guides and seats
440 square 4 manifold 2806178
440 spreadbore TQ manifolds

Small Block
915 "J" several can check valve sizes
915 C & B no smog
974 75-56 360 w/smog Q4
596 360 77-86 w/ ex seats w/ smog
587 360 76 360 no smog holes
360 38779218ee manifold

Tranny case C95639U
Side cover C95664Jc3 shift levers sifter and linkage
Tail C95619 H companion flange tailshaft

2 250 292 Chev 6 heads, one block one crank

AMC 6 early with shaft rocker 3170717 big square ports (which do not flow as well as the smaller ports and way less than 4.0 jeep head)

Buick 455 1246322 Q2 76-78?
wyrmrider
Guru
Guru
Posts: 6941
Joined: Thu Jan 10, 2013 10:52 pm
Location:

Re: mopar cylinder heads

Post by wyrmrider »

Two More blocks
2586430-4
3698830-4

Pistons- take outs
3671921 on 2951908 69 6 pack rods? (pistons are 66-70 4bbl legal
4318218
2 sets TRW 6 Pack 2355 .030 ---1/2 modified for D Cup - to work with 67 or Edelbrock closed chamber head

SP 2292P (TRW 2266) +.030
SP 2286P (TRW 2310) +.030 new in boxes

1241 +.040 fits 62 413 with 385 or 394 HP
1268 + .030
1730 + .030
B278 + .030
Post Reply