WTB Hines Crankshaft Balancing Computer Dead or Alive

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
superpursuit
Member
Member
Posts: 129
Joined: Sun Apr 20, 2014 11:07 pm

WTB Hines Crankshaft Balancing Computer Dead or Alive

Post by superpursuit » Mon Apr 22, 2019 12:37 am

Wanted to buy: Hines crankshaft balancing computer dead or alive. Must be green screen model from early 1990's.

If anyone has one of these, possibly left over from an upgrade, please let me know. Here is a photo so you know which one I mean.

Thanks. Allan.
Attachments
Nissan VG30 V6 Crankshaft Assembly being Balanced on our Hines Computerised Dynamic Balancing Machine..JPG

jred
Pro
Pro
Posts: 367
Joined: Sun Jun 11, 2006 12:14 am
Location: tucson arizona
Contact:

Re: WTB Hines Crankshaft Balancing Computer Dead or Alive

Post by jred » Thu Apr 25, 2019 1:43 am

so you must not had any luck on the repair of your coumpter ???

there is a green faced computer head on ebay the guy says it broken and he still wants 2500.00 for it
that 1/2 of what turner will sell you an upgrade for,,

Offer is still open if you want to send it to the guy here

let me know if I can help thanks j

jred
Pro
Pro
Posts: 367
Joined: Sun Jun 11, 2006 12:14 am
Location: tucson arizona
Contact:

Re: WTB Hines Crankshaft Balancing Computer Dead or Alive

Post by jred » Thu Apr 25, 2019 1:47 am

eBay item number:
150378331690
Seller assumes all responsibility for this listing.

superpursuit
Member
Member
Posts: 129
Joined: Sun Apr 20, 2014 11:07 pm

Re: WTB Hines Crankshaft Balancing Computer Dead or Alive

Post by superpursuit » Thu Apr 25, 2019 7:24 pm

jred wrote:
Thu Apr 25, 2019 1:43 am
so you must not had any luck on the repair of your coumpter ???

there is a green faced computer head on ebay the guy says it broken and he still wants 2500.00 for it
that 1/2 of what turner will sell you an upgrade for,,

Offer is still open if you want to send it to the guy here

let me know if I can help thanks j
Hello jred. No I have not had any luck repairing my computer yet. Thank you for all your help on this.

I do know of this computer on ebay. It seems like it has been advertised for years. I have contacted him and it is a 1988 model. It won't plug into my machine. They are different. He also says in his ad that he plugged it in in place of his earlier computer, which I assume must be a red screen model, and it shut down. It sounds like he fried the whole thing. $2500 for scrap is very expensive.

I am trying to get a computer that has a different problem than mine. My tech guy says he should be able to work through both computers by comparing them to each other to find the fault and if I am lucky I may end up with a spare computer if he can fix both.

Thanks. Allan.

jred
Pro
Pro
Posts: 367
Joined: Sun Jun 11, 2006 12:14 am
Location: tucson arizona
Contact:

Re: WTB Hines Crankshaft Balancing Computer Dead or Alive

Post by jred » Fri Apr 26, 2019 12:07 am

Ok but all the green faced computers that are here in Tucson are like the one on Ebay and do not look like yours,, I was under the impression that after the one that looks like the 0ne on eBay that Hines went to a computer screen and some soft ware with 2 black looking globes with lines though them,,

I am under the impression that T&S and CWT was using some software that looks like the Turner boys were helping them or did the development on it but that has also changed ,,and I think that they are now doing there own,,

By the way thanks for the link on the percentages as I have looked and Hines had some in their old manual that came with the machine but not much info as the 1 downloaded,,

Used to have to call GARY at Abs for info he was very good but has since passed away and we could get heavy metal from them 1 or 2 or as many as you wanted or needed,,

There is a area on Turners website that you can download the software and play with it if your interested email back and I'll walk you though it,,

best of luck on you machine but I'm afraid that you are sooner or later going to be forced into the upgrade..

superpursuit
Member
Member
Posts: 129
Joined: Sun Apr 20, 2014 11:07 pm

Re: WTB Hines Crankshaft Balancing Computer Dead or Alive

Post by superpursuit » Fri Apr 26, 2019 3:37 am

jred wrote:
Fri Apr 26, 2019 12:07 am
Ok but all the green faced computers that are here in Tucson are like the one on Ebay and do not look like yours,, I was under the impression that after the one that looks like the 0ne on eBay that Hines went to a computer screen and some soft ware with 2 black looking globes with lines though them,,

I am under the impression that T&S and CWT was using some software that looks like the Turner boys were helping them or did the development on it but that has also changed ,,and I think that they are now doing there own,,

By the way thanks for the link on the percentages as I have looked and Hines had some in their old manual that came with the machine but not much info as the 1 downloaded,,

Used to have to call GARY at Abs for info he was very good but has since passed away and we could get heavy metal from them 1 or 2 or as many as you wanted or needed,,

There is a area on Turners website that you can download the software and play with it if your interested email back and I'll walk you though it,,

best of luck on you machine but I'm afraid that you are sooner or later going to be forced into the upgrade..
The one on eBay is similar to mine but an earlier version. Mine has more plugs on the back. The lower part of the computer with the motor controls is removable so the differences there do not matter as I can use mine. I have no idea what the blue buttons on the right hand side do. Hines have obviously upgraded things as the model aged. The one on ebay I think must be the very first of the green screen machines as it was made in 1988. My computer is a 1993 model.

I'm happy the download link I gave to you was useful.

I did download the demo software from Turner already.

Thanks. Allan.

superpursuit
Member
Member
Posts: 129
Joined: Sun Apr 20, 2014 11:07 pm

Re: WTB Hines Crankshaft Balancing Computer Dead or Alive

Post by superpursuit » Sat May 04, 2019 12:19 am

Here is a better photo of my computer. The bottom part is the speed controller for the motor. It is removable so it does not need to be the same there.

Thanks. Allan.
Attachments
20180808_190422.jpg
20170821_142228.jpg

superpursuit
Member
Member
Posts: 129
Joined: Sun Apr 20, 2014 11:07 pm

Re: WTB Hines Crankshaft Balancing Computer Dead or Alive

Post by superpursuit » Thu Jun 06, 2019 9:17 pm

I am still looking for this so if anyone has any leads I would be grateful.

Thanks. Allan.

Post Reply