bridgeport valve seat options / recomdations tooling

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Carnut1
Guru
Guru
Posts: 4229
Joined: Tue Jun 11, 2013 6:32 pm
Location: Melbourne fl.

Re: bridgeport valve seat options / recomdations tooling

Post by Carnut1 » Mon Apr 01, 2019 1:49 pm

gunt wrote:
Mon Apr 01, 2019 10:19 am
Carnut1 , can you post a link or full name of the company , i'm no getting it :(

Cheers
Sorry, I couldn't find it either. I will let John know about this thread. Thanks, Charlie
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST

jcisworthy
Pro
Pro
Posts: 233
Joined: Sat Feb 09, 2013 4:22 pm
Location: Amsterdam NY
Contact:

Re: bridgeport valve seat options / recomdations tooling

Post by jcisworthy » Mon Apr 01, 2019 4:49 pm

Sorry I haven't been on here a lot.
I have a complete kit to turn your mill into a seat and guide machine. Most efficient one out there and very friendly. Fast and simple to go from milling to head work or resurfacing etc

Contact me at 518-915-3205 or rbjracing1@gmail.com
John
"Discouragement drains our spirits; perseverance accomplishes the job"
David Jeremiah

https://rbjracing1.wixsite.com/website

Phone 518-915-3203

ProPower engines
Guru
Guru
Posts: 7457
Joined: Sun Jan 21, 2007 1:16 pm
Location: VICTORIA BC CANADA

Re: bridgeport valve seat options / recomdations tooling

Post by ProPower engines » Tue Apr 02, 2019 2:06 am

gunt wrote:
Mon Apr 01, 2019 6:25 am
And whats the general view on these , apart from the clamping on the valve stem

http://www.newaytoolsales.com/refacers.htm
They suck to get a real nice valve job with. Too many tiny pieces to use and just about all they are good for is doing a half assed job.
Any one that tries to do custom head work that uses that system is just wasting their time and money when there
is better tooling available.

Sorry for the rant but I was one of those that wasted time and money many years ago when the new way stuff 1st came out
and while I did get the complete set up I may have used it 5-6 times and was not happy with the results at all and sold it all at a loss and got a new machine and related tooling to get the jobs done right.
Real Race Cars Don't Have Doors

gunt
Pro
Pro
Posts: 204
Joined: Sun Sep 26, 2010 2:52 pm

Re: bridgeport valve seat options / recomdations tooling

Post by gunt » Tue Apr 02, 2019 5:02 am

that was my thoughts , but mixed up the names and was scratching my head trying to figure out why this would be recommended , as i used this system 20yrs ago in training , and that's why i asked here as i dont have the funds to waste the money would be better spent else where .

Cheers

scotts439
Member
Member
Posts: 188
Joined: Wed Feb 16, 2011 10:50 am
Location: mass

Re: bridgeport valve seat options / recomdations tooling

Post by scotts439 » Mon Apr 15, 2019 8:27 pm

Look at Pete Graves CPmotorworks head fixture, and get the goodson 3D fastcut setup and you will be in business!!

gunt
Pro
Pro
Posts: 204
Joined: Sun Sep 26, 2010 2:52 pm

Re: bridgeport valve seat options / recomdations tooling

Post by gunt » Thu May 16, 2019 5:59 pm

any advice welcome ,
on 4 valve heads , and starting from fresh with not a clue on where to start any recommendations on cutters to buy from the NEWEN catalog would be greatly appreciated , or advice on angle dimensions sizes , cheers

Post Reply