Hello,
I fried the usb part of mine so no more communication with laptop, i can still use it with the unlimited license i have for certain ECM's
In order for me to use custom operating systems, i need it to be hooked up to my computer. Anyone have one laying around?
I know i can buy a new one but i thought i'd try here first
thanks
WTB Efilve Flashscan V2
Moderator: Team
-
- New Member
- Posts: 15
- Joined: Thu Feb 21, 2019 2:16 pm
- Location:
Re: WTB Efilve Flashscan V2
Did you get this repaired? Is it just the usb connector or the ftdi chip? What happened?
Heat is energy, energy is horsepower...but you gotta control the heat.
-Carl
-Carl
-
- New Member
- Posts: 15
- Joined: Thu Feb 21, 2019 2:16 pm
- Location:
Re: WTB Efilve Flashscan V2
EFIlive says that Its non repairable, it still receives power over usb, not sure what happened. All i know is that it happened when i tried to benchflash an ECM and grabbed the wrong cord.
I opened it up and i tried to id the USB chip, but no luck.
Have any idea what i would be looking for?
I opened it up and i tried to id the USB chip, but no luck.
Have any idea what i would be looking for?
Re: WTB Efilve Flashscan V2
I'd have to open mine up. What is a "wrong" usb cord?
Heat is energy, energy is horsepower...but you gotta control the heat.
-Carl
-Carl
-
- New Member
- Posts: 15
- Joined: Thu Feb 21, 2019 2:16 pm
- Location:
Re: WTB Efilve Flashscan V2
I meant that i uses the wrong bench harness, i was in a hurry. some ecms use the same plug but different pinout. usb cord is fine, just no communication with laptop.
Re: WTB Efilve Flashscan V2
Hiya, did you ever get your ftdi chip? If you are having problems locating the correct chip, I probably have it in stock from back when I was doing a bit of usb vs 8192 baud stuff many years ago. I'm just curious how this turned out for you.
Heat is energy, energy is horsepower...but you gotta control the heat.
-Carl
-Carl