Page 1 of 2
Selling off Complete Machine Shop
Posted: Tue Jul 03, 2018 10:07 am
by JRice
I bought this local shop out for the engine Dyno and a few other items. Looking to sell off the rest of the equipment. I have pictures of everything on my phone so just shoot me a text and I can send pictures of what you’re interested in.
Peterson TCM-25 dual head seat and guide machine $4000
Vgs-20 with tooling (white machine) $13,000
IDL CG-80 Centerless valve grinder $3500
Charlie Cocky head oven $1500 ???
Hines Balancer with tuner technology software $11,500
Storm Vulcan RT-17 CBN surfacer (not sure where to price it?)
BHJ block tru kit $900
Sunnen CH-100 with 7 mandrels (red machine) (I’ll get sizes and post them) Also I have a like new green machine I’d sell and keep this one to blast and repaint. Which ever sells first.
Red-$11,000
Green $12,500
Sunnen CK-10 (will come with 5-6 torque plates and all stones)
$8,500
Kwikway boring bars FN & FL and stand $6500
2x Sunnen piston pin press $1,100
Sunnen powerstroke Hone lots of mandrels (I’ll get model and price ASAP)
Charlie Cocky pressure tester $1500
Usmw bake, blast, tumble $7500
2x Sunnen cap grinders (both red machines) $1000
Rimac Spring tester (500lb)
Dynomaster run in stand
Lots of other small tooling I’ll get posted once I get everything sorted out.
Justin Rice
Rice Performance & Machining- RPM
479-200-4806
Re: Selling off Complete Machine Shop
Posted: Sat Jul 14, 2018 11:21 am
by The Badger
How much for rimac spring tester?
Re: Selling off Complete Machine Shop
Posted: Sun Jul 15, 2018 11:58 am
by tbenzy
details and whats included with ch-100?
Re: Selling off Complete Machine Shop
Posted: Sun Jul 15, 2018 4:31 pm
by JRice
I have a broker coming to look at everything on Tuesday 7/17/18
I will answer any and all questions after I hear what he offers for the whole lot.
Re: Selling off Complete Machine Shop
Posted: Wed Jul 18, 2018 5:57 pm
by JRice
Well the broker deal didn’t work out.
Those guys are crazy on what they think than can buy stuff for.
Anyway if anyone wants pictures or details on equipment please
Text me it’s easier to send pictures that way.
Re: Selling off Complete Machine Shop
Posted: Fri Jul 27, 2018 12:10 pm
by JRice
CH100 sold!
Re: Selling off Complete Machine Shop
Posted: Tue Aug 07, 2018 1:20 pm
by JRice
VGS-20 Sold
IDL CG-80 Sold
Rimac Valve spring tester Sold
Re: Selling off Complete Machine Shop
Posted: Sun Aug 12, 2018 11:20 pm
by Anthony legate
Do you have any pilots or counter bores for the tcm-25?
Re: Selling off Complete Machine Shop
Posted: Mon Aug 13, 2018 11:13 am
by JRice
Anthony legate wrote: ↑Sun Aug 12, 2018 11:20 pm
Do you have any pilots or counter bores for the tcm-25?
Yes the machine is completely tooled
Re: Selling off Complete Machine Shop
Posted: Thu Aug 23, 2018 11:19 am
by JRice
JRice wrote: ↑Tue Jul 03, 2018 10:07 am
I bought this local shop out for the engine Dyno and a few other items. Looking to sell off the rest of the equipment. I have pictures of everything on my phone so just shoot me a text and I can send pictures of what you’re interested in.
Peterson TCM-25 dual head seat and guide machine $4000
Vgs-20 with tooling (white machine) SOLD
IDL CG-80 Centerless valve grinder SOLD
Charlie Cocky head oven $1000
Hines Balancer with tuner technology software $9,500
Storm Vulcan RT-17 CBN surfacer $7500
BHJ block tru kit $900 (won’t sell until the Surfacer is sold)
Sunnen CH-100 with 7 mandrels (red machine) (I’ll get sizes and post them) Also I have a like new green machine I’d sell and keep this one to blast and repaint. Which ever sells first.
Red SOLD
Green SOLD
Sunnen CK-10 (will come with 6 torque plates and all stones)
$8,500
Kwikway boring bars FN & FL and stand $6500
2x Sunnen piston pin press $1,100
Sunnen powerstroke Hone lots of madrels $4,500
Charlie Cocky pressure tester $1200
Usmw bake, blast, tumble $6500
Sunnen cap grinders (red machines) cg750 $750
Rimac Spring tester (500lb) SOLD
Dynomaster run in stand $1500
Lots of other small tooling I’ll get posted once I get everything sorted out.
Justin Rice
Rice Performance & Machining- RPM
479-200-4806
Updated the list and prices need to move this stuff pretty quick. Will make pack deals on multiple pieces.
Re: Selling off Complete Machine Shop
Posted: Fri Aug 31, 2018 5:18 pm
by JRice
Storm Vulcan Sold (pending payment at pick up)
1 Sunnen piston pin press sold
Re: Selling off Complete Machine Shop
Posted: Tue Sep 18, 2018 7:18 am
by DEMT
Still got the hines balancer?
Re: Selling off Complete Machine Shop
Posted: Tue Sep 18, 2018 5:17 pm
by JRice
DEMT wrote: ↑Tue Sep 18, 2018 7:18 am
Still got the hines balancer?
Yes I do
Re: Selling off Complete Machine Shop
Posted: Fri Sep 21, 2018 12:20 pm
by JRice
JRice wrote: ↑Tue Jul 03, 2018 10:07 am
Peterson TCM-25 dual head seat and guide machine $4000
Vgs-20 with tooling (white machine) SOLD
IDL CG-80 Centerless valve grinder SOLD
Charlie Cocky head oven $1000
Hines Balancer with tuner technology software SOLD
Storm Vulcan RT-17 CBN surfacer $7500
BHJ block tru kit $900 (won’t sell until the Surfacer is sold)
Sunnen CH-100 with 2 mandrels 2400 & 2700 (red machine) $9500
Sunnen CK-10 (will come with 6 torque plates and all stones)
$8,500
Kwikway boring bars FN & FL and EBF stand $6500
Kwikway boring bar FN & 048 stand $5500
Winona Van Norman L250BW seat and guide machine $1500
Sunnen piston pin press $950
Sunnen powerstroke Hone lots of madrels $4,500
Charlie Cocky pressure tester $1200
Usmw bake, blast, tumble $6000
Sunnen cap grinders (red machines) cg750 $450 needs some work
Rimac Spring tester (500lb) SOLD
Dynomaster run in stand $1200
Lots of other small tooling I’ll get posted once I get everything sorted out.
Justin Rice
Rice Performance & Machining- RPM
479-200-4806
Updated list, prices, and added a couple of things
Re: Selling off Complete Machine Shop
Posted: Sat Sep 22, 2018 7:21 pm
by PHANTASM
can u send me pics of the run in stand?