Hex head driver and tip holders

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
bigblock57
New Member
New Member
Posts: 15
Joined: Sat Feb 01, 2014 11:11 pm
Location:

Hex head driver and tip holders

Post by bigblock57 »

Does anyone have any of Ricardos .375 hex head drivers and tip holders
Thanks
Bigblock
elvislee1987
Member
Member
Posts: 61
Joined: Tue Sep 26, 2017 9:59 am
Location:

Re: Hex head driver and tip holders

Post by elvislee1987 »

He is very slow at responding and I gave up and just bought some Newen tip holders. I was lucky enough to buy two hex heads from him like 7-8mos ago. Waited for him to make more tip holders but my patience ran low so I gave up.
tlowe
Member
Member
Posts: 92
Joined: Mon Feb 07, 2011 12:06 pm
Location: Dysart, Iowa

Re: Hex head driver and tip holders

Post by tlowe »

Thats to bad, I like the tools he made. Wonder what's up with Him.
bigblock57
New Member
New Member
Posts: 15
Joined: Sat Feb 01, 2014 11:11 pm
Location:

Re: Hex head driver and tip holders

Post by bigblock57 »

I emailed him and he said he has no help in his shop and concentrates on his 3angle cutters
Shame because I like his stuff and really want another hex drive
Bigblock57
elvislee1987
Member
Member
Posts: 61
Joined: Tue Sep 26, 2017 9:59 am
Location:

Re: Hex head driver and tip holders

Post by elvislee1987 »

I use his multiblade system and like it a lot. Bought his hex heads hoping he would make more tip holders but waiting 7-8mos for that to happen was not worth it. I'll eventually get his tip holders when he do have more in stock. Sucks because I really wanted to give his tip holders a try...
ProPower engines
Guru
Guru
Posts: 8686
Joined: Sun Jan 21, 2007 1:16 pm
Location: Victoria BC Canada

Re: Hex head driver and tip holders

Post by ProPower engines »

elvislee1987 wrote: Tue Jun 19, 2018 3:32 am I use his multiblade system and like it a lot. Bought his hex heads hoping he would make more tip holders but waiting 7-8mos for that to happen was not worth it. I'll eventually get his tip holders when he do have more in stock. Sucks because I really wanted to give his tip holders a try...
Just a heads up on his tip holders while I am sure you know they have different rake angles available Newan will also make cutters with extra rake up to 12 degrees.
I have used them and they work just as well as Ricardo's tip holders =D>
Real Race Cars Don't Have Doors
bigblock57
New Member
New Member
Posts: 15
Joined: Sat Feb 01, 2014 11:11 pm
Location:

Re: Hex head driver and tip holders

Post by bigblock57 »

The tip holders are not really the problem it was more the extra hex drivers I wanted as I only bought 1 to try the system and now I want another 2 so I can have different cutters set up
Bigblock
Post Reply