Needs tinkered with, but is all there. The motor works, but it doesn't spin fast enough or something or other. Was told it likely needs a capacitor replaced if my mind serves me correctly.
comes with original operators manual in 3 ring binder, and other random flow bench accessories.
located in NH. PM me for pictures, cosmetically the unit is in excellent shape.
$3,000 + shipping costs.
JKM 600cfm flow bench
Moderator: Team
-
- Expert
- Posts: 537
- Joined: Mon Dec 12, 2016 3:37 pm
- Location:
-
- Expert
- Posts: 537
- Joined: Mon Dec 12, 2016 3:37 pm
- Location:
Re: JKM 600cfm flow bench
comes with
-weather station
-valve opener with micrometer
-carburetor testing plate
-bore adapter x 1 4.030"/4.250"
-radius entry plates x 2
$2500 takes it.
-weather station
-valve opener with micrometer
-carburetor testing plate
-bore adapter x 1 4.030"/4.250"
-radius entry plates x 2
$2500 takes it.
-
- Guru
- Posts: 1508
- Joined: Sun Apr 03, 2016 1:17 am
- Location:
Re: JKM 600cfm flow bench
I'm interested in your bench. I'd like to see a few good pictures and a better, more detailed explanation of what is wrong with it. I've used a JKM 400 for years and it was stupid simple to operate.
Please hit me up on here. I tried to PM you but they both just stayed in my inbox.
Thank You for a prompt reply.
SS
Please hit me up on here. I tried to PM you but they both just stayed in my inbox.
Thank You for a prompt reply.
SS
-
- Expert
- Posts: 537
- Joined: Mon Dec 12, 2016 3:37 pm
- Location:
-
- Guru
- Posts: 1508
- Joined: Sun Apr 03, 2016 1:17 am
- Location:
Re: JKM 600cfm flow bench
Yes I did. THANK YOU.
I'm doing some research as to what may be the possible issue. It's hard to find information on these since the guy that built them is dead.
Is there any information in the manual relative to the issue you have? I know in my manual (I had a JKM 400 should have kept that thing) I thought it said every replacement part could be bought through one source.
Just want to do a bit of research before I buy.
Thank you
SS
I'm doing some research as to what may be the possible issue. It's hard to find information on these since the guy that built them is dead.
Is there any information in the manual relative to the issue you have? I know in my manual (I had a JKM 400 should have kept that thing) I thought it said every replacement part could be bought through one source.
Just want to do a bit of research before I buy.
Thank you
SS
-
- Expert
- Posts: 537
- Joined: Mon Dec 12, 2016 3:37 pm
- Location: