Fresh rebuilt, indicator was replaced. See tag from Sunnen. Used it to check clearances on one motor after getting it back. $750
pictures below
https://www.facebook.com/groups/4819724 ... 5396784126
Sunnen dial bore gage 2-6in
Moderator: Team
-
- Pro
- Posts: 279
- Joined: Tue Sep 03, 2013 3:03 pm
- Location:
Re: Sunnen dial bore gage 2-6in
You do know you're limiting your clientele to only Facebook members? Why not just post the photos here for all the honest world to see?
Jack Vines
Studebaker-Packard V8 Limited
Obsolete Engineering
Studebaker-Packard V8 Limited
Obsolete Engineering
-
- Pro
- Posts: 279
- Joined: Tue Sep 03, 2013 3:03 pm
- Location:
Re: Sunnen dial bore gage 2-6in
I couldn't figure out how. I can text/email them if you like. Or I will try to spend some more time on it tonight to see if I can figure it out
-
- Pro
- Posts: 279
- Joined: Tue Sep 03, 2013 3:03 pm
- Location:
Re: Sunnen dial bore gage 2-6in
See if this works.
You do not have the required permissions to view the files attached to this post.