In the market for a set of these. Here's a link to the BHJ page for what I'm talking about in case you're not sure. Thanks!
http://www.bhjproducts.com/bhj_content/ ... ng/chf.php
WTB BHJ CHF-2 Cylinderhead fixture
Moderator: Team
Re: WTB BHJ CHF-2 Cylinderhead fixture
Bump...
Still in the market for another set of these.
Still in the market for another set of these.
Len Hoffman
hamheads.com
hamheads.com
-
- Guru
- Posts: 1100
- Joined: Sun Jul 22, 2007 6:11 pm
- Location: NEBRASKA
- Contact:
Re: WTB BHJ CHF-2 Cylinderhead fixture
Not sure of your reasoning behind this particular fixture but here is a great alternative that can do so much more.
http://www.cpmotorworks.com/OnlineStore ... fault.aspx
http://www.cpmotorworks.com/OnlineStore ... fault.aspx
Nick Smithberg
http://www.smithbergracing.com
http://www.smithbergracing.com
Re: WTB BHJ CHF-2 Cylinderhead fixture
Bump. Still in the market for a pair of these.
Len Hoffman
hamheads.com
hamheads.com
- needforspeed66gt
- Guru
- Posts: 2069
- Joined: Sat May 06, 2006 6:18 pm
- Location: California
Re: WTB BHJ CHF-2 Cylinderhead fixture
I'll second this, Pete's fixture is better.SMITHBERGRACING wrote: ↑Fri Jun 16, 2017 2:43 am Not sure of your reasoning behind this particular fixture but here is a great alternative that can do so much more.
http://www.cpmotorworks.com/OnlineStore ... fault.aspx
Nate @steeldustmachine
Engine Machinist
Engine Machinist
Re: WTB BHJ CHF-2 Cylinderhead fixture
We have special mounting plates that we've cnc machined for specific applications that index to the BHJ fixtures. We want to dedicate one of our mills to another set-up based off them.
Pete's fixture is pretty cool, but we already have our plates setup for BHJ's and those things are super precise, rigid and we can change out plates in a matter of minutes and they always indicate with perfect repeatability which greatly speeds our setup time.
Pete's fixture is pretty cool, but we already have our plates setup for BHJ's and those things are super precise, rigid and we can change out plates in a matter of minutes and they always indicate with perfect repeatability which greatly speeds our setup time.
Len Hoffman
hamheads.com
hamheads.com