WTB BHJ CHF-2 Cylinderhead fixture

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
Hoffman
Pro
Pro
Posts: 254
Joined: Wed Sep 18, 2013 7:42 pm
Location:

WTB BHJ CHF-2 Cylinderhead fixture

Post by Hoffman »

In the market for a set of these. Here's a link to the BHJ page for what I'm talking about in case you're not sure. Thanks!
http://www.bhjproducts.com/bhj_content/ ... ng/chf.php
Len Hoffman
hamheads.com
Hoffman
Pro
Pro
Posts: 254
Joined: Wed Sep 18, 2013 7:42 pm
Location:

Re: WTB BHJ CHF-2 Cylinderhead fixture

Post by Hoffman »

Bump...
Still in the market for another set of these.
Len Hoffman
hamheads.com
SMITHBERGRACING
Guru
Guru
Posts: 1100
Joined: Sun Jul 22, 2007 6:11 pm
Location: NEBRASKA
Contact:

Re: WTB BHJ CHF-2 Cylinderhead fixture

Post by SMITHBERGRACING »

Not sure of your reasoning behind this particular fixture but here is a great alternative that can do so much more.
http://www.cpmotorworks.com/OnlineStore ... fault.aspx
Hoffman
Pro
Pro
Posts: 254
Joined: Wed Sep 18, 2013 7:42 pm
Location:

Re: WTB BHJ CHF-2 Cylinderhead fixture

Post by Hoffman »

Bump. Still in the market for a pair of these.
Len Hoffman
hamheads.com
User avatar
needforspeed66gt
Guru
Guru
Posts: 2069
Joined: Sat May 06, 2006 6:18 pm
Location: California

Re: WTB BHJ CHF-2 Cylinderhead fixture

Post by needforspeed66gt »

SMITHBERGRACING wrote: Fri Jun 16, 2017 2:43 am Not sure of your reasoning behind this particular fixture but here is a great alternative that can do so much more.
http://www.cpmotorworks.com/OnlineStore ... fault.aspx
I'll second this, Pete's fixture is better.
Nate @steeldustmachine
Engine Machinist
Hoffman
Pro
Pro
Posts: 254
Joined: Wed Sep 18, 2013 7:42 pm
Location:

Re: WTB BHJ CHF-2 Cylinderhead fixture

Post by Hoffman »

We have special mounting plates that we've cnc machined for specific applications that index to the BHJ fixtures. We want to dedicate one of our mills to another set-up based off them.

Pete's fixture is pretty cool, but we already have our plates setup for BHJ's and those things are super precise, rigid and we can change out plates in a matter of minutes and they always indicate with perfect repeatability which greatly speeds our setup time.
Len Hoffman
hamheads.com
Post Reply