DCM Scledum Surfacer

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
tlowe
Member
Member
Posts: 92
Joined: Mon Feb 07, 2011 12:06 pm
Location: Dysart, Iowa

DCM Scledum Surfacer

Post by tlowe »

DCM Scledum RT17PA
Super nice surface. Can be used as a wet grinder or a CBN (as it is setup in pics)
Hydraulic travel
Power feed of cutting head
A nice feature is set how many cuts you want and depth of cut and walk away.
Has a digital readout added to the head. Give precise measurement to the .0001, very nice to use.
Weighs about 3200 lbs, can load with forklift.
Tool board is included, very complete.
tom@12bolt.com 3193106920

13000 or Best offer

Image
Image
Image
Image
Image
Image
tlowe
Member
Member
Posts: 92
Joined: Mon Feb 07, 2011 12:06 pm
Location: Dysart, Iowa

Re: DCM Scledum Surfacer

Post by tlowe »

Lower price 12,500.00
tlowe
Member
Member
Posts: 92
Joined: Mon Feb 07, 2011 12:06 pm
Location: Dysart, Iowa

Re: DCM Scledum Surfacer

Post by tlowe »

Still for sale. Table movement is 50" and a 14" diameter CBN head.
It is on a pallet and ready to ship. Works perfect. Can help with shipping.
ebert
New Member
New Member
Posts: 43
Joined: Sun Mar 08, 2015 12:14 am
Location:

Re: DCM Scledum Surfacer

Post by ebert »

where is the machine located
ebert
New Member
New Member
Posts: 43
Joined: Sun Mar 08, 2015 12:14 am
Location:

Re: DCM Scledum Surfacer

Post by ebert »

what would the shipping be to 70458
PackardV8
Guru
Guru
Posts: 7619
Joined: Sun Jul 30, 2006 2:03 pm
Location: Spokane, WA

Re: DCM Scledum Surfacer

Post by PackardV8 »

I'll bump this up for you, cause it appears to be a really good deal on a really nice machine.
Jack Vines
Studebaker-Packard V8 Limited
Obsolete Engineering
Racing68
Pro
Pro
Posts: 407
Joined: Sat Feb 10, 2007 10:27 am
Location:

Re: DCM Scledum Surfacer

Post by Racing68 »

What is the maximum head length that can be surfaced with this machine.
ebert
New Member
New Member
Posts: 43
Joined: Sun Mar 08, 2015 12:14 am
Location:

Re: DCM Scledum Surfacer

Post by ebert »

do you know what it would cost to ship to 70458
tlowe
Member
Member
Posts: 92
Joined: Mon Feb 07, 2011 12:06 pm
Location: Dysart, Iowa

Re: DCM Scledum Surfacer

Post by tlowe »

Head length for full cut is 37"
Shipping to Louisiana is 1100
tlowe
Member
Member
Posts: 92
Joined: Mon Feb 07, 2011 12:06 pm
Location: Dysart, Iowa

SOLD

Post by tlowe »

This machine is SOLD
Post Reply