DCM Scledum Surfacer

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
tlowe
Member
Member
Posts: 62
Joined: Mon Feb 07, 2011 12:06 pm

DCM Scledum Surfacer

Post by tlowe » Wed May 03, 2017 10:14 am

DCM Scledum RT17PA
Super nice surface. Can be used as a wet grinder or a CBN (as it is setup in pics)
Hydraulic travel
Power feed of cutting head
A nice feature is set how many cuts you want and depth of cut and walk away.
Has a digital readout added to the head. Give precise measurement to the .0001, very nice to use.
Weighs about 3200 lbs, can load with forklift.
Tool board is included, very complete.
tom@12bolt.com 3193106920

13000 or Best offer

Image
Image
Image
Image
Image
Image

tlowe
Member
Member
Posts: 62
Joined: Mon Feb 07, 2011 12:06 pm

Re: DCM Scledum Surfacer

Post by tlowe » Wed May 31, 2017 9:07 am

Lower price 12,500.00

tlowe
Member
Member
Posts: 62
Joined: Mon Feb 07, 2011 12:06 pm

Re: DCM Scledum Surfacer

Post by tlowe » Fri Oct 20, 2017 12:59 pm

Still for sale. Table movement is 50" and a 14" diameter CBN head.
It is on a pallet and ready to ship. Works perfect. Can help with shipping.

ebert
New Member
New Member
Posts: 21
Joined: Sun Mar 08, 2015 12:14 am

Re: DCM Scledum Surfacer

Post by ebert » Sat Oct 21, 2017 10:04 am

where is the machine located

ebert
New Member
New Member
Posts: 21
Joined: Sun Mar 08, 2015 12:14 am

Re: DCM Scledum Surfacer

Post by ebert » Sat Oct 21, 2017 10:24 am

what would the shipping be to 70458

PackardV8
Guru
Guru
Posts: 5033
Joined: Sun Jul 30, 2006 2:03 pm

Re: DCM Scledum Surfacer

Post by PackardV8 » Sun Oct 22, 2017 4:35 pm

I'll bump this up for you, cause it appears to be a really good deal on a really nice machine.
Jack Vines
Studebaker-Packard V8 Limited
Obsolete Engineering

Racing68
Pro
Pro
Posts: 254
Joined: Sat Feb 10, 2007 10:27 am

Re: DCM Scledum Surfacer

Post by Racing68 » Mon Oct 23, 2017 11:39 pm

What is the maximum head length that can be surfaced with this machine.

ebert
New Member
New Member
Posts: 21
Joined: Sun Mar 08, 2015 12:14 am

Re: DCM Scledum Surfacer

Post by ebert » Tue Oct 24, 2017 8:38 am

do you know what it would cost to ship to 70458

tlowe
Member
Member
Posts: 62
Joined: Mon Feb 07, 2011 12:06 pm

Re: DCM Scledum Surfacer

Post by tlowe » Tue Oct 24, 2017 10:39 am

Head length for full cut is 37"
Shipping to Louisiana is 1100

tlowe
Member
Member
Posts: 62
Joined: Mon Feb 07, 2011 12:06 pm

SOLD

Post by tlowe » Tue Oct 31, 2017 9:50 am

This machine is SOLD

Post Reply