NOT ALLOWED: Selling or reselling in a retail manner.
6 posts • Page 1 of 1
- Posts: 87
- Joined: Thu Aug 15, 2013 4:40 pm
Thank you for the reply. We do high end aluminum heads and need a machine with spindle and feed control (VFD for PCD cutter) and a small foot print. This is why the Comec RP 850 is appealing. The new price offered by the USA dealer is very high for what a surfacer really is--simple but a single purpose machine. The Comec RP 850 has a 13" diameter cutter capacity head and the widest heads we do are right at 12".Reef wrote:I don't know if you are interested in a Berco RSC 950, I have 2 and am considering selling 1.
We can purchase a new large table knee mill that will do the job for less than $10K. We already have two knee mills which do a bunch of work for us and really do not have the room for a third mill dedicated to head resurfacing.
I believe the Berco RSC 950 is an excellent machine but needs a lot of up-dates/modifications to fit our needs.
- New Member
- Posts: 41
- Joined: Tue Jan 11, 2011 5:37 pm
In Chico, Ca.$3500.seems very fair. The machine is capable of blocks and heads . They were originally designed with a wet stone. The one I primarily use has a cbn conversion and does a nice job on aluminum heads, that I will keep, the other can be used as is or converted by buyer.The traverse speed is adjustable making it rather versatile.