Looking to buy a chuck disassembly tool for an SVS. It is specific to the SVS and perhaps some of the other older KWs. The tool has a long rod, with a big wingnut on one end and a special cup on the other end to fit the chuck cap.
Want to clarify I do not need the disassembly tool for the SVSII, shown in the link here: http://www.kwik-way.com/store2/index.ph ... cts_id=554
Already have that tool and it isn't right for my machine in my understanding. Thanks!
WTB: Kwik-Way SVS Chuck Disassembly Tool
Moderator: Team
-
Cinnabar325is
- New Member
- Posts: 31
- Joined: Fri Aug 05, 2016 5:20 pm
- Location: Bechtelsville, Pennsylvania