Im looking to buy k-line instalation kits, 7, 8, 9 mm and 3/8 and 11/32"
Im also looking for a lot of pilots, sioux, sunnen, kwikway, neway etc, expandable or regular pilots, .375 or .385" top.
And im looking for a driving arbor for the counterbore cutters in the top of this picture
Im only running a small shop with a small budget so im looking for good usable parts but it doesnt have to be brand new in mint condition
Misc valve guide tools wanted
Moderator: Team
-
- Guru
- Posts: 8707
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: Misc valve guide tools wanted
The best place to look is used equipment dealers on ebay.
There is several good guys there that have good quality used stuff available.
There is several good guys there that have good quality used stuff available.
Real Race Cars Don't Have Doors
-
- Expert
- Posts: 732
- Joined: Sun Sep 28, 2008 11:06 am
- Location: Frostburg, MD
Re: Misc valve guide tools wanted
check this guy, send him a message. Good guy.
http://stores.ebay.com/Automotive-Machi ... 7675.l2563
http://stores.ebay.com/Automotive-Machi ... 7675.l2563
Re: Misc valve guide tools wanted
I have a expandable guide adjustment wrench and black&decker seat grinder stone holder (Hex keyed)
-
- Pro
- Posts: 274
- Joined: Sun Jun 20, 2010 11:27 pm
- Location: Canton Ga
Re: Misc valve guide tools wanted
http://cavcosales.homestead.com
Check with Dan at Cavco.
He is one of the best used equipment guys I've ever dealt with.
Andy
Check with Dan at Cavco.
He is one of the best used equipment guys I've ever dealt with.
Andy
-
- Guru
- Posts: 8707
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: Misc valve guide tools wanted
Blue Malibu wrote:http://cavcosales.homestead.com
Check with Dan at Cavco.
He is one of the best used equipment guys I've ever dealt with.
Andy
X 2
He has the best inventory of sioux stuff. On a different note the driver you are looking for is that for 375 and 385 top pilots
If you are looking for pilots because you have several different types of drivers already quality original sioux pilots are hard to come by where 375 top are what every one else used other then Sunnen.
Drivers for counter bore cutters have a hard life and the cost of a new driver is so inexpensive I would not consider used.
I just got a new driver from Cylinder head Supply as they are made by the same company that makes the tooling for Rottler
Real Race Cars Don't Have Doors
Re: Misc valve guide tools wanted
I think those cutters shown are Lisle valve seat cutters from the '70s. Lisle stuff used to be pretty reasonable.