Misc valve guide tools wanted

[Pogona]

Im looking to buy k-line instalation kits, 7, 8, 9 mm and 3/8 and 11/32"

Im also looking for a lot of pilots, sioux, sunnen, kwikway, neway etc, expandable or regular pilots, .375 or .385" top.

And im looking for a driving arbor for the counterbore cutters in the top of this picture



Im only running a small shop with a small budget so im looking for good usable parts but it doesnt have to be brand new in mint condition

[ProPower engines]

The best place to look is used equipment dealers on ebay.
There is several good guys there that have good quality used stuff available.

[dave brode]

check this guy, send him a message. Good guy.

http://stores.ebay.com/Automotive-Machi ... 7675.l2563

[Ari G]

I have a expandable guide adjustment wrench and black&decker seat grinder stone holder (Hex keyed)

[Blue Malibu]

http://cavcosales.homestead.com

Check with Dan at Cavco.
He is one of the best used equipment guys I've ever dealt with.


Andy

[ProPower engines]

http://cavcosales.homestead.com

Check with Dan at Cavco.
He is one of the best used equipment guys I've ever dealt with.


Andy

X 2
He has the best inventory of sioux stuff. On a different note the driver you are looking for is that for 375 and 385 top pilots
If you are looking for pilots because you have several different types of drivers already quality original sioux pilots are hard to come by where 375 top are what every one else used other then Sunnen.
Drivers for counter bore cutters have a hard life and the cost of a new driver is so inexpensive I would not consider used.
I just got a new driver from Cylinder head Supply as they are made by the same company that makes the tooling for Rottler

[kkustomz]

X3 Dan at Cavco is great!

[jsgarage]

I think those cutters shown are Lisle valve seat cutters from the '70s. Lisle stuff used to be pretty reasonable.