For Sale: Kwik Way 041 seat and guide machine

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
cadamzak
New Member
New Member
Posts: 32
Joined: Wed Apr 16, 2014 3:19 am
Location:

For Sale: Kwik Way 041 seat and guide machine

Post by cadamzak »

I have a 041 kwik way seat and guide machine with all tooling to get you on your way, I also have a new american rotary 5hp phase converter that goes with. comes with 5/16, 11/32, and 3/8 pilots, that are .437 top. large assortment of c/bore tools for seat replacement also. also have the 3D setup also for cutting seats. machine works great. email me if you are interested. $9000 OBO. cadamzak@hotmail.com. located in Ashland WI.......everything i have goes with
You do not have the required permissions to view the files attached to this post.
cadamzak
New Member
New Member
Posts: 32
Joined: Wed Apr 16, 2014 3:19 am
Location:

Re: For Sale: Kwik Way 041 seat and guide machine

Post by cadamzak »

7000 firm
cadamzak
New Member
New Member
Posts: 32
Joined: Wed Apr 16, 2014 3:19 am
Location:

Re: For Sale: Kwik Way 041 seat and guide machine

Post by cadamzak »

6000
1mach
New Member
New Member
Posts: 39
Joined: Sat Apr 17, 2010 6:20 am
Location:

Re: For Sale: Kwik Way 041 seat and guide machine

Post by 1mach »

Hi , On the Kwik Way 041 seat and guide machine can one do canted valve cylinder head work ?

Bye
cadamzak
New Member
New Member
Posts: 32
Joined: Wed Apr 16, 2014 3:19 am
Location:

Re: For Sale: Kwik Way 041 seat and guide machine

Post by cadamzak »

Yes the table rotates 360 degrees and also tips side to side
1mach
New Member
New Member
Posts: 39
Joined: Sat Apr 17, 2010 6:20 am
Location:

Re: For Sale: Kwik Way 041 seat and guide machine

Post by 1mach »

OK, enlarged the pics in paint and studied them in more detail , the 360 rotation is very visible and now the slotted either end brackets is also now clear where the head is clapped onto the two parallel bars.

The head fixture sits on the main table of the KW41SG_machine , now how do you advance from one guide hole to another when doing the cutting or boring of the seats and guides.

It isn't clear to me ?

Bye
ProPower engines
Guru
Guru
Posts: 8686
Joined: Sun Jan 21, 2007 1:16 pm
Location: Victoria BC Canada

Re: For Sale: Kwik Way 041 seat and guide machine

Post by ProPower engines »

It has an air float table
You step on a valve and the table floats where ever you push it.
Real Race Cars Don't Have Doors
Post Reply