just wanted to add some info for those who have asked about accuracy on my snap on vg3000 for sale.
QC at factory for chuck runout on this machine was:
#1 bar, 4 tenths.
#2 bar 10 tenths.
#3 bar 5 tenths.
#4 bar 4 tenths.
this covers the range of the chuck for max T.I.R.
valve face micro finish: 24
always had under .001 T.I.R. on 5/16, 11/32 and 3/8 valves.
around .0006 T.I.R. average on good 11/32 valves with straight stems and proper tip chamfer.
excellent finish on face using sioux oil and pro blend mirror finish.
Machine has ground less than 500 valves and is in new condition, if your local bring a GOOD valve and check yourself before you buy. I have indicators or bring yours.
Thanks, Aaron
sioux 2075/snap-on vg3000 valve grinder
Moderator: Team
-
- New Member
- Posts: 5
- Joined: Sun Nov 18, 2007 5:50 pm
- Location:
sioux 2075/snap-on vg3000 valve grinder
You do not have the required permissions to view the files attached to this post.
Re: sioux 2075/snap-on vg3000 valve grinder
Aaron-
How far away from Janesville are you?
How far away from Janesville are you?
Pete Graves
CPMotorworks,Inc.
Custom Engine Machining
Cylinder Head Fixture for Vertical / Surfacing Mills since 2008
CPMotorworks,Inc.
Custom Engine Machining
Cylinder Head Fixture for Vertical / Surfacing Mills since 2008
-
- New Member
- Posts: 42
- Joined: Thu Jun 27, 2013 7:02 pm
- Location:
-
- New Member
- Posts: 5
- Joined: Sun Nov 18, 2007 5:50 pm
- Location:
Re: sioux 2075/snap-on vg3000 valve grinder
Hello,
Entertaining reasonable offers.
Its really a good machine just no reason for me to have two of them.
Thanks, Aaron
Entertaining reasonable offers.
Its really a good machine just no reason for me to have two of them.
Thanks, Aaron