Sunnen VGS-20 for sale

[Rick Wilkinson]

VGS-20 Front View.JPG

Sunnen VGS-20 seat & guide machine
Late 80’s vintage (Green color)
Good working condition
Some tooling included with machine
Machine sold as is
More pictures available upon request

$ 11,500.00 OBO USD

Contact:
Rick Wilkinson
Cylinder Head Tech and Sales
AJPE
1097 Foxen Canyon Rd.
Santa Maria, CA 93454
Phone: (805) 922-1202 ext. 116
Fax: (805) 922-1084
E-mail: rick@ajpe.net

[Rick Wilkinson]

Price reduced to $10,000.00
Here's the tooling included with machine
Rick

VGS-20 Toolng.JPG

[Rick Wilkinson]

SOLD

[ALKYAL]

Anyone else looking for one of these ? If so, I have one with work lights and a swing out tool board. Have same type cutters [with 3 ea 45 degx.060 wd cutters and 3 misc HP sweep cutters and 2 holders] and the original three [3] blade cutters[60/45/30 deg blades] and setting fixture. I have ALL Sioux Pilots for 11/32 + /- 3/8 +/- 7/16+/- and 7.0 mm set[min 4 ea size]. Also have tooling for Solid replacement [core drills/ reamers and VGS adaptors] .502 OD guides both 11/32 and 3/8= Included is a Gem seat run-out gage. a 0-1/2 jacobs chuck with a VGS adaptor and spot facer and misc sized pilots. A 36 in straight edge-a seat puller-a guide OD knurler tool-seat scriber/works off the pilot-Spare draw bar and some misc. spare new and used VGS spare parts. A large lot of NEW repl. Seats and Guides [Value of 750.00 min] There is also a set of sunnen seat-ring cutters and the micrometer setting fixture. Have pics of machine and parts if you are REALLY SERIOUS, also have original manuals for this machine. I am the original owner of this machine-never used for production type work. NEED to get 11,500.00 [OR 10,500.00 without the sunnen seat ring cutters and the micrometer setting fixture] loaded on your truck or trailer. Let me know as I am closing up and this is my last pc to sell. Thanks Al