11/32 Inch Valve Guide liner Installation Kit
Moderator: Team
11/32 Inch Valve Guide liner Installation Kit
Looking for a 11/32 Inch Valve Guide liner Installation Kit. K-line...ect
-
- Guru
- Posts: 8707
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: 11/32 Inch Valve Guide liner Installation Kit
There is tons of this stuff on ebay.
Decide which specific guide sizes you will work with to get the correct broaches for sizing.
Decide which specific guide sizes you will work with to get the correct broaches for sizing.
Real Race Cars Don't Have Doors
Re: 11/32 Inch Valve Guide liner Installation Kit
I have currently have several k-line kits. Its just that the 11/32 kit I have has seen several 1000 guides installed and is worn out. Just checking to see if anyone has one collecting dust before I order new.
http://www.cylinderheadsupply.com/kl1601rx.html
http://www.cylinderheadsupply.com/kl1601rx.html
-
- Guru
- Posts: 8707
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: 11/32 Inch Valve Guide liner Installation Kit
Brian W wrote:I have currently have several k-line kits. Its just that the 11/32 kit I have has seen several 1000 guides installed and is worn out. Just checking to see if anyone has one collecting dust before I order new.
http://www.cylinderheadsupply.com/kl1601rx.html
What parts are worn out.
The Boring tool can be had off of K-Lines ebay store for less then half of anywhere else as well as the sizing broach's etc.
Typical cost for broach's is $15 for the carbide balls but you get the idea
Hell I just got 2 black Beauty reamers for under a $100 yesterday as they are selling off all their excess tooling and unpopular liner kits and components.
I bought 15 boxs of liners at $12 to $15 each from their store
I just had 3 box's of liners shipped from K-Line today that cost me $357.00. Ya gotta save where ya can in this biz
Just trying to help
Dave
Real Race Cars Don't Have Doors