Boring Bar stand

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
Speedbump
Guru
Guru
Posts: 1085
Joined: Thu Nov 22, 2007 10:53 am
Location: AZ

Boring Bar stand

Post by Speedbump »

Looking for a Kwik Way or Peterson EBS-90 or similar for my Rottler DA-0 bar. Willing to travel 5-600 miles from So. AZ for right machine and price. PM.
Speedbump
"If it was easy, everybody would do it."
ProPower engines
Guru
Guru
Posts: 8686
Joined: Sun Jan 21, 2007 1:16 pm
Location: Victoria BC Canada

Re: Boring Bar stand

Post by ProPower engines »

There are a few KW EBF stands available from some equip. dealers and will work with any boring bar.
There is a guy in Iowa that makes the rings for them for KW but much cheaper if you find one and it's missing some sets you need.
Real Race Cars Don't Have Doors
PackardV8
Guru
Guru
Posts: 7619
Joined: Sun Jul 30, 2006 2:03 pm
Location: Spokane, WA

Re: Boring Bar stand

Post by PackardV8 »

Ferris Equipment in TX has one for $2750. How much were you looking to spend?
Jack Vines
Studebaker-Packard V8 Limited
Obsolete Engineering
Speedbump
Guru
Guru
Posts: 1085
Joined: Thu Nov 22, 2007 10:53 am
Location: AZ

Re: Boring Bar stand

Post by Speedbump »

I looked at that one and may make the trip if it's still available. Just thought I'd try here first. Thanks.
Speedbump
"If it was easy, everybody would do it."
buck
Expert
Expert
Posts: 557
Joined: Thu Mar 14, 2013 2:56 pm
Location: Detroit MI

Re: Boring Bar stand

Post by buck »

One was listed cheap on ebay today
BMR @ Facebook
Speedbump
Guru
Guru
Posts: 1085
Joined: Thu Nov 22, 2007 10:53 am
Location: AZ

Re: Boring Bar stand

Post by Speedbump »

Thanks. I have the Rottler one about that size or slightly larger that was designed for small inlines and outboards, I think. It's just not up to automotive size, V style blocks, IMO.
Speedbump
"If it was easy, everybody would do it."
Post Reply